Centre de documentation
scientifique

Accuracy analysis of UAV photogrammetry using RGB and multispectral sensors / Nikola Santrač in Geodetski vestnik, vol 67 n° 4 (December 2023)  

Public [article]  inGeodetski vestnik > vol 67 n° 4 (December 2023) . - pp 459 - 472 Titre : Accuracy analysis of UAV photogrammetry using RGB and multispectral sensors Type de document : Article/Communication Auteurs : Nikola Santrač, Auteur ; Pavel Benka, Auteur ; Mehmed Batilović, Auteur ; et al., Auteur Année de publication : 2023 Article en page(s) : pp 459 - 472 Note générale : bibliographie Langues : Anglais (eng) Slovène (slv) Descripteur : [Vedettes matières IGN] Photogrammétrie numérique [Termes IGN] image captée par drone [Termes IGN] image multibande [Termes IGN] image RVB [Termes IGN] modèle géométrique de prise de vue [Termes IGN] point d'appui [Termes IGN] positionnement cinématique en temps réel [Termes IGN] qualité des données Résumé : (auteur) In recent years, unmanned aerial vehicles (UAVs) have become increasingly important as a tool for quickly collecting high-resolution (spatial and spectral) imagery of the Earth's surface. The final products are highly dependent on the choice of values for various parameters in flight planning, the type of sensors, and the processing of the data. In this paper ground control points (GCPs) were first measured using the Global Navigation Satellite System (GNSS) Real-Time Kinematic (RTK) method, and then due to the low height accuracy of the GNSS RTK method all points were measured using a detailed leveling method. This study aims to provide a basic assessment of quality, including four main aspects: (1) the difference between an RGB sensor and a five-band multispectral sensor on accuracy and the amount of data, (2) the impact of the number of GCPs on the accuracy of the final products, (3) the impact of different altitudes and cross flight strips, and (4) the accuracy analysis of multi-altitude models. The results suggest that the type of sensor, flight configuration, and GCP setup strongly affect the quality and quantity of the final product data while creating a multi-altitude model does not result in the expected quality of data. With its unique combination of sensors and parameters, the results and recommendations presented in this paper can assist professionals and researchers in their future work. Numéro de notice : A2023-241 Affiliation des auteurs : non IGN Thématique : IMAGERIE Nature : Article DOI : 10.15292/geodetski-vestnik.2023.04.459-472 Date de publication en ligne : 01/12/2023 En ligne : https://dx.doi.org/10.15292/geodetski-vestnik.2023.04.459-472 Format de la ressource électronique : URL article Permalink : https://documentation.ensg.eu/index.php?lvl=notice_display&id=103604 [article]

A hierarchical multiview registration framework of TLS point clouds based on loop constraint / Hao Wu in ISPRS Journal of photogrammetry and remote sensing, vol 195 (January 2023)  

Public [article]  inISPRS Journal of photogrammetry and remote sensing > vol 195 (January 2023) . - pp 65 - 76 Titre : A hierarchical multiview registration framework of TLS point clouds based on loop constraint Type de document : Article/Communication Auteurs : Hao Wu, Auteur ; Li Yan, Auteur ; Hong Xie, Auteur ; et al., Auteur Année de publication : 2023 Article en page(s) : pp 65 - 76 Note générale : bibliographie Langues : Anglais (eng) Descripteur : [Vedettes matières IGN] Lasergrammétrie [Termes IGN] algorithme ICP [Termes IGN] appariement de points [Termes IGN] approche hiérarchique [Termes IGN] données lidar [Termes IGN] données localisées 3D [Termes IGN] graphe [Termes IGN] recalage d'image [Termes IGN] semis de points [Termes IGN] superposition de données [Termes IGN] traitement de semis de points Résumé : (auteur) Automatic registration of multiple point clouds is a significant preprocessing step for 3D computer vision tasks including semantic segmentation, 3D modelling, change detection, etc. Many methods were proposed to deal with this problem and yet most of them are not fully utilizing the redundant information offered by multiple common overlaps among point clouds. The existing methods are also inefficient when dealing with large-scale point clouds. In this paper, a novel automatic registration framework is presented to align point clouds efficiently and robustly. First, the overall number of scans is grouped into several scan-blocks by a proposed blocking strategy, and we build the pairwise relationship among scans through a fully connected graph in each scan-block. Second, perform loop-based coarse registration in each scan-block using a proposed false matches removal strategy. The proposed strategy can effectively identify grossly wrong scan-to-scan matches. Third, the minimum spanning tree is extracted from the graph, and ICP is applied along its edges. Moreover, the Lu–Milios algorithm is used to further optimize all poses at once by utilizing all redundant information in each scan-block. Finally, global block-to-block registration aligns all scan-blocks into a uniform coordinate reference. We test our framework on challenging WHU-TLS datasets, ETH datasets, and Robotic 3D Scan datasets to evaluate the efficiency, accuracy, as well as robustness. The experiment results show that our method achieves the state-of-the-art accuracy, while the time performance is improved by more than 30% compared with the state-of-the-art algorithms. Our source code is made available at https://github.com/WuHao-WHU/HL-MRF for benchmarking purposes. Numéro de notice : A2023-008 Affiliation des auteurs : non IGN Thématique : IMAGERIE Nature : Article nature-HAL : ArtAvecCL-RevueIntern DOI : 10.1016/j.isprsjprs.2022.11.004 Date de publication en ligne : 19/11/2022 En ligne : https://doi.org/10.1016/j.isprsjprs.2022.11.004 Format de la ressource électronique : URL article Permalink : https://documentation.ensg.eu/index.php?lvl=notice_display&id=102112 [article]

Production of orthophoto map using mobile photogrammetry and comparative assessment of cost and accuracy with satellite imagery for corridor mapping: a case study in Manesar, Haryana, India / Manuj Dev in Annals of GIS, vol 29 n° 1 (January 2023)  

Public [article]  inAnnals of GIS > vol 29 n° 1 (January 2023) . - pp 163 - 176 Titre : Production of orthophoto map using mobile photogrammetry and comparative assessment of cost and accuracy with satellite imagery for corridor mapping: a case study in Manesar, Haryana, India Type de document : Article/Communication Auteurs : Manuj Dev, Auteur ; Shetru M. Veerabhadrappa, Auteur ; Ashutosh Kainthola, Auteur ; et al., Auteur Année de publication : 2023 Article en page(s) : pp 163 - 176 Note générale : bibliographie Langues : Anglais (eng) Descripteur : [Vedettes matières IGN] Orthophotographie, orthoimage [Termes IGN] aérotriangulation [Termes IGN] analyse comparative [Termes IGN] image panoramique [Termes IGN] image satellite [Termes IGN] modèle stéréoscopique [Termes IGN] orthoimage [Termes IGN] orthophotocarte [Termes IGN] point d'appui [Termes IGN] positionnement cinématique en temps réel [Termes IGN] système de numérisation mobile Résumé : (auteur) The study aims to find a low-cost alternate technology to get imagery, using mobile platform, and produce digital orthophoto for corridor mapping, with a higher degree of accuracy and which can reduce the lag time of acquisition of data. The present study uses digital single-lens reflex cameras, mounted on a mobile vehicle, and acquisition of data in the video format rather than still photographs, as traditionally used in mobile mapping systems. The videos are used to create a set of images and orthophotos. A widespread ground control points were recorded in the study area, using the global navigation satellite system receiver, which measured the control points in real-time kinematic mode. Generation of digital orthophoto has been completed using the captured mobile imagery and ground control point. Furthermore, procurement of satellite imagery and aerial triangulation using ground control points have been done. While comparing the planimetric accuracy of orthophoto against satellite imagery using the ground control points, the achieved root mean square error value of produced orthophoto is 0.171 m in X axis and 0.205 m in Y axis. However, for Cartosat -1 satellite imagery, the RMSE value for X is 1.22 m and for Y is 1.98 m. This research proposes the alternate low-cost mobile mapping method to capture the imagery for orthophoto production. The cost of orthophoto production from mobile image was found 77% cheaper than the orthophoto cost from fresh/latest satellite imagery procurement, while the overall production was 70% cost-effective than the orthophoto maps made from archived imagery. Numéro de notice : A2023-161 Affiliation des auteurs : non IGN Thématique : IMAGERIE Nature : Article DOI : 10.1080/19475683.2022.2141853 Date de publication en ligne : 12/11/2022 En ligne : https://doi.org/10.1080/19475683.2022.2141853 Format de la ressource électronique : URL article Permalink : https://documentation.ensg.eu/index.php?lvl=notice_display&id=102864 [article]

Automatic registration of point cloud and panoramic images in urban scenes based on pole matching / Yuan Wang in International journal of applied Earth observation and geoinformation, vol 115 (December 2022)  

Public [article]  inInternational journal of applied Earth observation and geoinformation > vol 115 (December 2022) . - n° 103083 Titre : Automatic registration of point cloud and panoramic images in urban scenes based on pole matching Type de document : Article/Communication Auteurs : Yuan Wang, Auteur ; Yuhao Li, Auteur ; Yiping Chen, Auteur ; et al., Auteur Année de publication : 2022 Article en page(s) : n° 103083 Note générale : bibliographie Langues : Anglais (eng) Descripteur : [Vedettes matières IGN] Lasergrammétrie [Termes IGN] appariement de formes [Termes IGN] chevauchement [Termes IGN] extraction de traits caractéristiques [Termes IGN] image panoramique [Termes IGN] image virtuelle [Termes IGN] optimisation par essaim de particules [Termes IGN] points registration [Termes IGN] recalage d'image [Termes IGN] scène urbaine [Termes IGN] segmentation sémantique [Termes IGN] semis de points [Termes IGN] télémétrie laser mobile [Termes IGN] zone tampon Résumé : (auteur) Given the initial calibration of multiple sensors, the fine registration between Mobile Laser Scanning (MLS) point clouds and panoramic images is still challenging due to the unforeseen movement and temporal misalignment while collecting. To tackle this issue, we proposed a novel automatic method to register the panoramic images and MLS point clouds based on the matching of pole objects. Firstly, 2D pole instances in the panoramic images are extracted by a semantic segmentation network and then optimized. Secondly, every corresponding frustum point cloud of each pole instance is obtained by a shape-adaptive buffer region in the panoramic image, and the 3D pole object is extracted via a combination of slicing, clustering, and connected domain analysis, then all 3D pole objects are fused. Finally, 2D and 3D pole objects are re-projected onto virtual images respectively, and then fine 2D-3D correspondences are collected through maximizing pole overlapping area by Particle Swarm Optimization (PSO). The accurate extrinsic orientation parameters are acquired by the Efficient Perspective-N-Point (EPnP). The experiments indicate that the proposed method performs effectively on two challenging urban scenes with an average registration error of 2.01 pixels (with RMSE 0.88) and 2.35 pixels (with RMSE 1.03), respectively. Numéro de notice : A2022-827 Affiliation des auteurs : non IGN Thématique : IMAGERIE Nature : Article DOI : 10.1016/j.jag.2022.103083 Date de publication en ligne : 07/11/2022 En ligne : https://doi.org/10.1016/j.jag.2022.103083 Format de la ressource électronique : URL article Permalink : https://documentation.ensg.eu/index.php?lvl=notice_display&id=102011 [article]

Potential and limitation of PlanetScope images for 2-D and 3-D Earth surface monitoring with example of applications to glaciers and earthquakes / Saif Aati in IEEE Transactions on geoscience and remote sensing, vol 60 n° 10 (October 2022)  

Public [article]  inIEEE Transactions on geoscience and remote sensing > vol 60 n° 10 (October 2022) . - n° 4512919 Titre : Potential and limitation of PlanetScope images for 2-D and 3-D Earth surface monitoring with example of applications to glaciers and earthquakes Type de document : Article/Communication Auteurs : Saif Aati , Auteur ; Jean-Philippe Avouac, Auteur ; Ewelina Rupnik , Auteur ; Marc Pierrot-Deseilligny , Auteur Année de publication : 2022 Article en page(s) : n° 4512919 Note générale : bibliographie Langues : Anglais (eng) Descripteur : [Vedettes matières IGN] Traitement d'image optique [Termes IGN] analyse de scène 3D [Termes IGN] artefact [Termes IGN] image PlanetScope [Termes IGN] modèle de déformation des images [Termes IGN] modèle par fonctions rationnelles [Termes IGN] séisme [Termes IGN] surveillance géologique Résumé : (auteur) The Planet PlanetScope (PS) CubeSat constellation acquires high-resolution optical images that cover the entire surface of the Earth daily, enabling an unprecedented capability to monitor the Earth’s surface changes. However, our analysis reveals artifacts of the geometry of PS images related to the imaging system and processing issues, limiting the usability of these data for various Earth science applications, including the monitoring of glaciers, dune motion, or the measurement of ground deformation due to earthquakes and landslides. Here, we analyze these artifacts and propose ways to remediate them. We use two examples to evaluate the data and assess the performance of our proposed approaches. The first is the ground deformation caused by the 2019 Ridgecrest earthquake sequence, California, USA, and the second is the 2018–2019 surge of the Shisper glacier in the Karakorum. Using an image correlation technique, we show that PS images exhibit several geometric artifacts, such as scene-to-scene misregistration, inconsistence geolocation accuracy between spectral bands, and topographic artifacts. Altogether, these artifacts make a quantitative analysis of ground displacement difficult and inaccurate. We present a method that remediates most of these geometric artifacts. In addition, we propose a framework for selecting the most appropriate images and a procedure for refining the rational function model (RFM) of unrectified images to monitor surface displacements and topography changes in 3-D. These tools should enhance the use of PS images for Earth science applications. Numéro de notice : A2022-951 Affiliation des auteurs : UGE-LASTIG+Ext (2020- ) Thématique : IMAGERIE Nature : Article nature-HAL : ArtAvecCL-RevueIntern DOI : 10.1109/TGRS.2022.3215821 Date de publication en ligne : 19/10/2022 En ligne : https://doi.org/10.1109/TGRS.2022.3215821 Format de la ressource électronique : URL article Permalink : https://documentation.ensg.eu/index.php?lvl=notice_display&id=103278 [article]

PKS: A photogrammetric key-frame selection method for visual-inertial systems built on ORB-SLAM3 / Arash Azimi in ISPRS Journal of photogrammetry and remote sensing, vol 191 (September 2022)  

Permalink

Exploring the vertical dimension of street view image based on deep learning: a case study on lowest floor elevation estimation / Huan Ning in International journal of geographical information science IJGIS, vol 36 n° 7 (juillet 2022)  

Permalink

Fusing Sentinel-2 and Landsat 8 satellite images using a model-based method / Jakob Sigurdsson in Remote sensing, vol 14 n° 13 (July-1 2022)  

Permalink

3D browsing of wide-angle fisheye images under view-dependent perspective correction / Mingyi Huang in Photogrammetric record, vol 37 n° 178 (June 2022)  

Permalink

True orthophoto generation based on unmanned aerial vehicle images using reconstructed edge points / Mojdeh Ebrahimikia in Photogrammetric record, vol 37 n° 178 (June 2022)  

Permalink

Calibration of a light hemispherical radiance field imaging system / Manchun Lei in ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences, vol V-1-2022 (2022 edition)  

Permalink

3D lidar point-cloud projection operator and transfer machine learning for effective road surface features detection and segmentation / Heyang Thomas Li in The Visual Computer, vol 38 n° 5 (May 2022)  

Permalink

Hybrid georeferencing of images and LiDAR data for UAV-based point cloud collection at millimetre accuracy / Norbert Haala in ISPRS Open Journal of Photogrammetry and Remote Sensing, vol 4 (April 2022)  

Permalink

An approach to extracting digital elevation model for undulating and hilly terrain using de-noised stereo images of Cartosat-1 sensor / Litesh Bopche in Applied geomatics, vol 14 n° 1 (March 2022)  

Permalink

Applications of multi-image remote sensing / Roger Mari Molas (2022)  

Permalink