Centre de documentation
scientifique

Detailed cultural heritage recording produced with traditional methods and laser scanning / Ljubo Lah in Geodetski vestnik, vol 67 n° 4 (December 2023)  

Public [article]  inGeodetski vestnik > vol 67 n° 4 (December 2023) . - pp 442 - 458 Titre : Detailed cultural heritage recording produced with traditional methods and laser scanning Type de document : Article/Communication Auteurs : Ljubo Lah, Auteur ; Alain Guerreau, Auteur ; Mojca K. Fras, Auteur ; Tilen Urbančič, Auteur Année de publication : 2023 Article en page(s) : pp 442 - 458 Note générale : bibliographie Langues : Anglais (eng) Slovène (slv) Descripteur : [Vedettes matières IGN] Applications photogrammétriques [Termes IGN] analyse de données [Termes IGN] données lidar [Termes IGN] données localisées 3D [Termes IGN] église [Termes IGN] matrice orthogonale [Termes IGN] patrimoine culturel [Termes IGN] topométrie de précision Résumé : (auteur) Traditional measurement methods are still widely used for recording cultural heritage objects. On the other hand, geodetic surveying and modern technologies such as 3D laser scanning can provide more accurate, geometrically consistent and extremely detailed data that can be used as a basis for detailed vector maps or 3D models. The main aim of our research was to investigate the complementary approach, using both traditional and modern methods, in order to produce detailed vector maps of the Romanesque church of St. Martin in Chapaize, France, which are essential for further unveiling its historic development. Geometrically, this church is rather extensive and has many irregularities in its shape. Our approach to the documentation process is presented and evaluated in this paper. We applied the Procrustes analysis for the ground floor map, which gave us an objective accuracy assessment. Point clouds of the bell tower acquired by two different laser instruments have also been compared. Numéro de notice : A2023-240 Affiliation des auteurs : non IGN Thématique : IMAGERIE/INFORMATIQUE/POSITIONNEMENT Nature : Article DOI : 10.15292/geodetski-vestnik.2023.04.442-458 Date de publication en ligne : 01/12/2023 En ligne : https://dx.doi.org/10.15292/geodetski-vestnik.2023.04.442-458 Format de la ressource électronique : URL article Permalink : https://documentation.ensg.eu/index.php?lvl=notice_display&id=103603 [article]

Performance tests of geodetic receivers with tilt sensors in obstructed environments using the NRTK GNSS technique / Puttipol Dumrongchai in Journal of applied geodesy, vol 17 n° 1 (January 2023)  

Public [article]  inJournal of applied geodesy > vol 17 n° 1 (January 2023) . - pp 39 - 51 Titre : Performance tests of geodetic receivers with tilt sensors in obstructed environments using the NRTK GNSS technique Type de document : Article/Communication Auteurs : Puttipol Dumrongchai, Auteur ; Jittranud Patsadutarn, Auteur ; Chalermchon Satirapod, Auteur Année de publication : 2023 Article en page(s) : pp 39 - 51 Note générale : bibliographie Langues : Anglais (eng) Descripteur : [Vedettes matières IGN] Applications de géodésie spatiale [Termes IGN] centrale inertielle [Termes IGN] Continuously Operating Reference Station network [Termes IGN] délimitation [Termes IGN] lever cadastral [Termes IGN] microsystème électromécanique [Termes IGN] positionnement cinématique en temps réel [Termes IGN] récepteur GNSS [Termes IGN] signal GNSS [Termes IGN] station virtuelle de référence [Termes IGN] Thaïlande Résumé : (auteur) The Department of Lands (DOL), Thailand, has adopted the Network-based Real-Time Kinematic (NRTK) Global Navigation Satellite System (GNSS) surveying technique using a Virtual Reference Station (VRS) to support cadastral surveys since 2011. Determining accurate coordinates of parcel boundary markers at building corners or near fences and walls is difficult because a GNSS range pole cannot be leveled with a circular bubble. This study aims to evaluate the performance of the receivers equipped with tilt sensors for horizontal and vertical positioning. Two types of tilt sensors used for evaluation were a magnetometer and micro-electro-mechanical system (MEMS) and an inertial measurement unit (IMU). Conducting the NRTK GNSS surveying tests was based on the pole tilt angles of 0°, 15°, 25°, 35°, and 45° from a plumb line in controlled and obstructed environments. The IMU-based tilt sensor had more advantage of accurately positioning over the MEMS sensor. The results showed that using the IMU, better than 4 cm horizontal positioning accuracy was achievable when the pole was tilted by 15° or less under non-multipath and open-sky conditions. The vertical accuracy was of a few centimeter levels and least sensitive to tilt angles using either type of sensor. However, none of the sensors precisely compensated for pole tilt in strong-multipath and complex environments, causing increased horizontal errors in decimeter levels. Numéro de notice : A2023-111 Affiliation des auteurs : non IGN Thématique : POSITIONNEMENT Nature : Article DOI : 10.1515/jag-2022-0047 Date de publication en ligne : 07/11/2022 En ligne : https://doi.org/10.1515/jag-2022-0047 Format de la ressource électronique : URL article Permalink : https://documentation.ensg.eu/index.php?lvl=notice_display&id=102470 [article]

Détermination de la déviation de la verticale sur le barrage de Plan d’Aval, sans aucune instrumentation spéciale, avec une précision de 0,4 mgon / Thomas Touzé in XYZ, n° 173 (décembre 2022)

Public [article]  inXYZ > n° 173 (décembre 2022) . - pp 30 - 34 Titre : Détermination de la déviation de la verticale sur le barrage de Plan d’Aval, sans aucune instrumentation spéciale, avec une précision de 0,4 mgon Type de document : Article/Communication Auteurs : Thomas Touzé, Auteur Année de publication : 2022 Article en page(s) : pp 30 - 34 Note générale : Bibliographie Langues : Français (fre) Descripteur : [Vedettes matières IGN] Applications de géodésie spatiale [Termes IGN] barrage [Termes IGN] déviation de la verticale [Termes IGN] données GNSS [Termes IGN] incertitude de position [Termes IGN] lever tachéométrique [Termes IGN] surveillance d'ouvrage Résumé : (Editeur) Dans cet article, nous proposons une nouvelle méthode de détermination de la déviation de la verticale à partir de mesures tachéométriques corrigées de la réfraction et de lignes de base GNSS. Si l’état de l’art est bien respecté, une précision de l’ordre de 0,3 mgon (1’’) sur une visée de 1 km semble tout à fait atteignable. Nous présentons ainsi les résultats obtenus lors de la surveillance de deux barrages EDF dans les Alpes ayant permis de déterminer la déviation de la verticale avec une incertitude à 68 % de 0,4 mgon (1.3’’) et en cohérence avec la valeur déduite du géoïde. Numéro de notice : A2022-914 Affiliation des auteurs : non IGN Thématique : POSITIONNEMENT Nature : Article nature-HAL : ArtAvecCL-RevueNat DOI : sans Permalink : https://documentation.ensg.eu/index.php?lvl=notice_display&id=102277 [article]

Exemplaires(1)

Code-barres	Cote	Support	Localisation	Section	Disponibilité
112-2022041	RAB	Revue	Centre de documentation	En réserve L003	Disponible

On study of the Earth topography correction for the GRACE surface mass estimation / Fan Yang in Journal of geodesy, vol 96 n° 12 (December 2022)  

Public [article]  inJournal of geodesy > vol 96 n° 12 (December 2022) . - n° 95 Titre : On study of the Earth topography correction for the GRACE surface mass estimation Type de document : Article/Communication Auteurs : Fan Yang, Auteur ; Zhicai Luo, Auteur ; Hao Zhou, Auteur ; et al., Auteur Année de publication : 2022 Article en page(s) : n° 95 Note générale : bibliographie Langues : Anglais (eng) Descripteur : [Vedettes matières IGN] Géodésie physique [Termes IGN] champ de pesanteur terrestre [Termes IGN] données GRACE [Termes IGN] formule de Stokes [Termes IGN] géoïde gravimétrique [Termes IGN] itération [Termes IGN] masse de la Terre [Termes IGN] topographie Résumé : (auteur) Traditional conversion from gravity Stokes coefficients into the surface mass, e.g., in the GRACE(-FO) applications, presumes the Earth as a perfect sphere that is apparently against the reality. Recent studies manage to correct the conversion by considering the Earth’s oblateness, in another word, the Earth is treated as an ellipsoid. However, the Earth’s geometry is far more complicated due to the topography, so that neither a sphere nor an ellipsoid is exact. Evidences from recent studies and this one demonstrate that any geometrical approximation of the Earth shape like a presumed sphere will inevitably lead to a bias in the surface mass estimation from GRACE gravity fields, resulting in a possible misinterpretation of geophysical signals that may occur in polar regions or mountain areas. In this context, we propose an iterative scaling factor method to numerically realize a more accurate surface mass estimate, considering a more realistic geometry of the Earth including its oblateness, topography and geoid undulation. Verified with a series of simulations, the proposed method is found to be efficient (less than four iterations), reliable (after a broad range of tests) and universally accurate (reducing at least 80% of the bias). Relative to our method, the mean linear trend in 2002–2015 estimated from GRACE under an ideal spherical Earth is found to be underestimated by about 3.1% and 5.5% over Greenland and West Antarctica, respectively. Among the trend underestimation, the topography-related contribution takes up − 0.5% (0.79 Gt/yr, the negative sign denotes an overestimation) and − 0.4% (0.34 Gt/yr), respectively. Although the value is small, it is a systematic bias worth considering, for example, it is greater than the influence (0.3 Gt/yr on the trend estimation over West Antarctica) by switching atmospherical de-aliasing products from RL05 to RL06. Besides, the topography-induced bias rapidly increases to 2.7% (0.26 mm/yr) at mountain Himalayas, which is even larger than the ellipsoid-induced bias (0.19 mm/yr). Based on the results obtained so far, the topography-induced bias is found to be roughly one order of magnitude smaller than GRACE’s present measurement error; nevertheless, it will be relevant once the GRACE is improved toward its baseline accuracy. In particular, the topography correction should be considered for NGGM that expects to map the Earth gravity field in an unprecedented accuracy and spatial resolution. Numéro de notice : A2022-878 Affiliation des auteurs : non IGN Thématique : POSITIONNEMENT Nature : Article DOI : 10.1007/s00190-022-01683-0 Date de publication en ligne : 02/12/2022 En ligne : https://doi.org/10.1007/s00190-022-01683-0 Format de la ressource électronique : URL article Permalink : https://documentation.ensg.eu/index.php?lvl=notice_display&id=102189 [article]

Machine learning models applied to a GNSS sensor network for automated bridge anomaly detection / Nicolas Manzini in Journal of structural engineering, Vol 148 n° 11 (November 2022)  

Public [article]  inJournal of structural engineering > Vol 148 n° 11 (November 2022) . - n° 3469 Titre : Machine learning models applied to a GNSS sensor network for automated bridge anomaly detection Type de document : Article/Communication Auteurs : Nicolas Manzini, Auteur ; André Orcesi, Auteur ; Christian Thom , Auteur ; Marc-Antoine Brossault, Auteur ; Serge Botton , Auteur ; Miguel Ortiz, Auteur ; John Dumoulin, Auteur Année de publication : 2022 Projets : 2-Pas d'info accessible - article non ouvert / Article en page(s) : n° 3469 Note générale : bibliographie EN ATTENTE DU DOCUMENT Langues : Anglais (eng) Descripteur : [Vedettes matières IGN] Topographie [Termes IGN] apprentissage automatique [Termes IGN] classification par réseau neuronal récurrent [Termes IGN] détection d'anomalie [Termes IGN] ouvrage d'art [Termes IGN] pont [Termes IGN] régression [Termes IGN] série temporelle [Termes IGN] surveillance d'ouvrage [Termes IGN] topométrie de précision Résumé : (auteur) Structural health monitoring (SHM) based on global navigation satellite systems (GNSS) is an interesting solution to provide absolute positions at different locations of a structure in a global reference frame. In particular, low-cost GNSS stations for large-scale bridge monitoring have gained increasing attention these last years because recent experiments showed the ability to achieve a subcentimeter accuracy for continuous monitoring with adequate combinations of antennas and receivers. Technical solutions now allow displacement monitoring of long bridges with a cost-effective deployment of GNSS sensing networks. In particular, the redundancy of observations within the GNSS network with various levels of correlations between the GNSS time series makes such monitoring solution a good candidate for anomaly detection based on machine learning models, using several predictive models for each sensor (based on environmental conditions, or other sensors as input data). This strategy is investigated in this paper based on GNSS time series, and an anomaly indicator is proposed to detect and locate anomalous structural behavior. The proposed concepts are applied to a cable-stayed bridge for illustration, and the comparison between multiple tools highlights recurrent neural networks (RNN) as an effective regression tool. Coupling this tool with the proposed anomaly detection strategy enables one to identify and localize both real and simulated anomalies in the considered data set. Numéro de notice : A2022-672 Affiliation des auteurs : UGE-LASTIG+Ext (2020- ) Thématique : POSITIONNEMENT Nature : Article nature-HAL : ArtAvecCL-RevueIntern DOI : 10.1061/(ASCE)ST.1943-541X.0003469 En ligne : https://doi.org/10.1061/(ASCE)ST.1943-541X.0003469 Format de la ressource électronique : URL article Permalink : https://documentation.ensg.eu/index.php?lvl=notice_display&id=101615 [article]

Challenges and limitations of earthquake-induced building damage mapping techniques using remote sensing images : A systematic review / Sahar S. Matin in Geocarto international, Vol 37 n° 21 ([01/10/2022])  

Permalink

Le cheminement du douzième parallèle (deuxième partie) : article tiré de Jalon, bulletin de l’association des personnels retraités de l’IGN, n° 146-bis de mai 2022 / Jean-Claude Leblanc in XYZ, n° 172 (septembre 2022)

Permalink

Advancements in underground mine surveys by using SLAM-enabled handheld laser scanners / Artu Ellmann in Survey review, vol 54 n° 385 (July 2022)  

Permalink

Exploring the vertical dimension of street view image based on deep learning: a case study on lowest floor elevation estimation / Huan Ning in International journal of geographical information science IJGIS, vol 36 n° 7 (juillet 2022)  

Permalink

Mixed geographically and temporally weighted regression for spatio-temporal deformation modelling / Zhijia Yang in Survey review, vol 54 n° 385 (July 2022)  

Permalink

Building Information Modelling (BIM) for property valuation: A new approach for Turkish Condominium Ownership / Nida Celik Simsek in Survey review, vol 54 n° 384 (May 2022)  

Permalink

City3D: Large-scale building reconstruction from airborne LiDAR point clouds / Jin Huang in Remote sensing, vol 14 n° 9 (May-1 2022)  

Permalink

Performance analysis of low-cost GNSS stations for structural health monitoring of civil engineering structures / Nicolas Manzini in Structure and Infrastructure Engineering, vol 18 n° 5 ([01/05/2022])  

Permalink

Accuracy issues for spatial update of digital cadastral maps / David Pullar in ISPRS International journal of geo-information, vol 11 n° 4 (April 2022)  

Permalink

Mapping power / Ben Ori Gitai (2022)  

Permalink