Centre de documentation
scientifique

Implementation of close range photogrammetry using modern non-metric digital cameras for architectural documentation / Mariem A. Elhalawani in Geodesy and cartography, vol 47 n° 1 (January 2021)  

Public [article]  inGeodesy and cartography > vol 47 n° 1 (January 2021) . - pp 45 - 53 Titre : Implementation of close range photogrammetry using modern non-metric digital cameras for architectural documentation Type de document : Article/Communication Auteurs : Mariem A. Elhalawani, Auteur ; Zaki M. Zeidan, Auteur ; Ashraf A. Beshr, Auteur Année de publication : 2021 Article en page(s) : pp 45 - 53 Note générale : bibliographie Langues : Anglais (eng) Descripteur : [Vedettes matières IGN] Photogrammétrie numérique [Termes IGN] caméra numérique [Termes IGN] Egypte [Termes IGN] façade [Termes IGN] longueur focale [Termes IGN] monument historique [Termes IGN] mosquée [Termes IGN] photogrammétrie architecturale [Termes IGN] point d'appui [Termes IGN] reconstruction 3D [Termes IGN] station de travail de photogrammétrie numérique Résumé : (auteur) The development of applied geodetic techniques for mapping and documentation of historical structures, buildings and sites is an important and vital purpose for contribution of any recording of cultural heritage for any country such as Egypt. This is done to preserve and restore any valuable architectural or other cultural monument, as a support to architectural, archaeological and other art-historical research throughout the ages. The purpose of this paper is to use close range photogrammetry technique (CRP) to reconstruct 3D model of architectural and historical mosque facade and comparing the accuracy of using digital commercial non-metric cameras with different resolutions and metric camera with flatbed scanner and photogrammetric scanner for architectural building documentation. El-Nasr Mosque façade in Mansoura city, Egypt was chosen as a case study in this paper. At first, twenty five points were selected at mosque façade at different elevations and distributed at different façade surfaces and observed using total station. Some of these points were selected as control points and the others were selected as check points to validate the results. Effect of control point’s number on image processing and analysis is also studied. Three cameras positions were selected for imaging to get the full details of mosque façade. Close range Digital Workstation (CDW) program was used for processing and analysis of multiple images. The results are indicated that close range photogrammetry using metric camera with photogrammetry scanner instead of flatbed scanner in technique is accurate enough to be beneficial in 3D architectural building documentation. Digital cameras with CRP technique give up different accuracy that depends mainly on the resolution of cameras and camera specifications. Numéro de notice : A2021-452 Affiliation des auteurs : non IGN Thématique : IMAGERIE Nature : Article DOI : 10.3846/gac.2021.11269 Date de publication en ligne : 26/04/2021 En ligne : https://doi.org/10.3846/gac.2021.11269 Format de la ressource électronique : URL article Permalink : https://documentation.ensg.eu/index.php?lvl=notice_display&id=97873 [article]

Study the precision of creating 3D structure modeling from terrestrial laser scanner observations / Zaki M. Zeidan in Journal of applied geodesy, vol 12 n° 4 (October 2018)  

Public [article]  inJournal of applied geodesy > vol 12 n° 4 (October 2018) . - pp. 303 - 310 Titre : Study the precision of creating 3D structure modeling from terrestrial laser scanner observations Type de document : Article/Communication Auteurs : Zaki M. Zeidan, Auteur ; Ashraf A. Beshr, Auteur ; Ashraf G. Shehata, Auteur Année de publication : 2018 Article en page(s) : pp. 303 - 310 Note générale : bibliographie Langues : Anglais (eng) Descripteur : [Vedettes matières IGN] Lasergrammétrie [Termes IGN] analyse comparative [Termes IGN] carte d'intérieur [Termes IGN] données lidar [Termes IGN] données localisées 3D [Termes IGN] modélisation 3D [Termes IGN] précision des données [Termes IGN] qualité des données [Termes IGN] semis de points [Termes IGN] télémétrie laser terrestre Résumé : (auteur) Laser scanner has become widely used nowadays for several applications in civil engineering. An advantage of laser scanner as compared to other geodetic instruments is its capability of collecting hundreds or even thousands of point per second. Terrestrial laser scanner allows acquiring easy and fast complex geometric data from building, machines, objects, etc. Several experimental and field tests are required to investigate the quality and accuracy of scanner points cloud and the 3D geometric models derived from laser scanner. So this paper investigates the precision of creation three dimensional structural model resulted from terrestrial laser scanner observations. The paper also presented the ability to create 3D model by structural faces depending on the plane equation for each face resulted from coordinates of several observed points cover this face using reflector less total station observations. Precision comparison for the quality of 3D models created from laser scanner observations and structure faces is also presented.The results of the practical measurements, calculations and analysis of results are presented. Numéro de notice : A2018-434 Affiliation des auteurs : non IGN Thématique : IMAGERIE Nature : Article nature-HAL : ArtAvecCL-RevueIntern DOI : 10.1515/jag-2018-0009 Date de publication en ligne : 29/08/2018 En ligne : https://doi.org/10.1515/jag-2018-0009 Format de la ressource électronique : URL article Permalink : https://documentation.ensg.eu/index.php?lvl=notice_display&id=91002 [article]