Centre de documentation
scientifique

Iterative data assimilation approach for the refinement of marine geoid models using sea surface height and dynamic topography datasets / Sander Varbla in Journal of geodesy, vol 97 n° 3 (March 2023)  

Public [article]  inJournal of geodesy > vol 97 n° 3 (March 2023) . - n° 24 Titre : Iterative data assimilation approach for the refinement of marine geoid models using sea surface height and dynamic topography datasets Type de document : Article/Communication Auteurs : Sander Varbla, Auteur ; Artu Ellmann, Auteur Année de publication : 2023 Article en page(s) : n° 24 Note générale : bibliographie Langues : Anglais (eng) Descripteur : [Vedettes matières IGN] Géodésie physique [Termes IGN] collocation par moindres carrés [Termes IGN] données altimétriques [Termes IGN] geoïde marin [Termes IGN] hauteurs de mer [Termes IGN] itération [Termes IGN] levé gravimétrique [Termes IGN] simulation hydrodynamique Résumé : (auteur) The modelling errors of marine geoid models may reach up to a few decimetres in the shorter wavelength spectrum due to gravity data void areas and/or inaccurate data. Various data acquisition methods can provide sea surface heights more accurately. Similarly, hydrodynamic model data in conjunction with tide gauge readings allow the derivation of reliable dynamic topography. Geometrical marine geoid heights, independent of the usual gravity-based marine geoid models, can be obtained by removing the estimated dynamic topography from sea surface height measurements. This study exploits such geometry information to refine marine geoid models. A data assimilation approach was developed that iteratively combines sea surface height and dynamic topography datasets with an initial gravimetric geoid model. A case study is presented using sea surface heights from shipborne GNSS campaigns and an airborne laser scanning survey for refining the EIGEN-6C4 global geopotential model. Comparisons with a high-resolution regional marine geoid model reveal that the initial discrepancies of up to around two decimetres reduce to sub-decimetre within the study area. It is concluded that the developed iterative data assimilation approach can significantly improve the accuracy of marine geoid models, especially in regions where gravity data are of poor quality or unavailable. Numéro de notice : A2023-157 Affiliation des auteurs : non IGN Thématique : POSITIONNEMENT Nature : Article nature-HAL : ArtAvecCL-RevueIntern DOI : 10.1007/s00190-023-01711-7 Date de publication en ligne : 15/03/2023 En ligne : https://doi.org/10.1007/s00190-023-01711-7 Format de la ressource électronique : URL article Permalink : https://documentation.ensg.eu/index.php?lvl=notice_display&id=102846 [article]

Advancements in underground mine surveys by using SLAM-enabled handheld laser scanners / Artu Ellmann in Survey review, vol 54 n° 385 (July 2022)  

Public [article]  inSurvey review > vol 54 n° 385 (July 2022) . - pp 363 - 374 Titre : Advancements in underground mine surveys by using SLAM-enabled handheld laser scanners Type de document : Article/Communication Auteurs : Artu Ellmann, Auteur ; Kaia Kütimets, Auteur ; Sander Varbla, Auteur ; et al., Auteur Année de publication : 2022 Article en page(s) : pp 363 - 374 Note générale : bibliographie Langues : Anglais (eng) Descripteur : [Vedettes matières IGN] Lasergrammétrie [Termes IGN] arpentage [Termes IGN] carrière souterraine [Termes IGN] cartographie et localisation simultanées [Termes IGN] données lidar [Termes IGN] Estonie [Termes IGN] géoréférencement [Termes IGN] industrie minière [Termes IGN] mine [Termes IGN] modélisation 3D [Termes IGN] schiste [Termes IGN] semis de points [Termes IGN] système de numérisation mobile [Termes IGN] télémètre laser terrestre Résumé : (auteur) Applicability of SLAM (simultaneous localization and mapping) technology for mine surveys and subsequent 3D modelling of post-extracted surfaces is assessed. The resulting surface geometry is validated via terrestrial laser scanner (TLS) acquired reference data. Typical discrepancies remained within 2 and 5 cm in horizontal and vertical directions, respectively. Discrepancies between TLS, SLAM-enabled handheld scanner and conventional surveying results are small and fully satisfy the contemporary accuracy requirements, yet evidence that the conventional mine survey results are affected by the subjectivity of the surveyors. The SLAM-enabled laser scanning hence appears to be the most suitable method for underground mining surveys. Numéro de notice : A2022-537 Affiliation des auteurs : non IGN Thématique : IMAGERIE Nature : Article nature-HAL : ArtAvecCL-RevueIntern DOI : 10.1080/00396265.2021.1944545 Date de publication en ligne : 07/07/2021 En ligne : https://doi.org/10.1080/00396265.2021.1944545 Format de la ressource électronique : URL article Permalink : https://documentation.ensg.eu/index.php?lvl=notice_display&id=101093 [article]

Shipborne GNSS acquisition of sea surface heights in the Baltic Sea / Aive Lilibusk in Journal of geodetic science, vol 12 n° 1 (January 2022)  

Public [article]  inJournal of geodetic science > vol 12 n° 1 (January 2022) . - pp 1 - 21 Titre : Shipborne GNSS acquisition of sea surface heights in the Baltic Sea Type de document : Article/Communication Auteurs : Aive Lilibusk, Auteur ; Sander Varbla, Auteur ; Artu Ellmann, Auteur ; et al., Auteur Année de publication : 2022 Article en page(s) : pp 1 - 21 Note générale : bibliographie Langues : Anglais (eng) Descripteur : [Termes IGN] Baltique, mer [Termes IGN] Continuously Operating Reference Station network [Termes IGN] hauteurs de mer [Termes IGN] instrument embarqué [Termes IGN] navire [Termes IGN] positionnement cinématique [Termes IGN] positionnement par GNSS [Termes IGN] positionnement ponctuel précis [Termes IGN] surface de la mer [Vedettes matières IGN] Altimétrie Résumé : (auteur) For determining precise sea surface heights, six marine GNSS (global navigation satellite system) survey campaigns were performed in the eastern Baltic Sea in 2021. Four GNSS antennas were installed on the vessel, the coordinates of which were computed relative to GNSS–CORS (continuously operating reference stations). The GNSS–CORS results are compared to the PPP (precise point positioning)-based results. Better accuracy is associated with the GNSS–CORS postprocessed points; however, the PPP approach provided more accurate results for longer than 40 km baselines. For instance, the a priori vertical accuracy of the PPP solution is, on average, 0.050 ± 0.006 m and more stable along the entire vessel’s survey route. Conversely, the accuracy of CORS-based solutions decreases significantly when the distances from the GNSS–CORS exceed 40 km, whereas the standard deviation between the CORS and PPP-based solutions is up to 0.075 m in these sections. Note that in the harbor (about 4 km from the nearest GNSS–CORS), the standard deviation of vertical differences between the two solutions remains between 0.013 and 0.024 m. In addition, the GNSS antennas situated in different positions on the vessel indicated different measurement accuracies. It is suggested for further studies that at least one GNSS antenna should be mounted above the mass center of the vessel to reduce the effects of the dominating pitch motion during the surveys. Numéro de notice : A2022-530 Affiliation des auteurs : non IGN Thématique : POSITIONNEMENT Nature : Article DOI : 10.1515/jogs-2022-0131 Date de publication en ligne : 23/06/2022 En ligne : https://doi.org/10.1515/jogs-2022-0131 Format de la ressource électronique : URL article Permalink : https://documentation.ensg.eu/index.php?lvl=notice_display&id=101076 [article]

Accuracy assessment of RTK-GNSS equipped UAV conducted as-built surveys for construction site modelling / Sander Varbla in Survey review, Vol 53 n° 381 (November 2021)  

Public [article]  inSurvey review > Vol 53 n° 381 (November 2021) . - pp 477 - 492 Titre : Accuracy assessment of RTK-GNSS equipped UAV conducted as-built surveys for construction site modelling Type de document : Article/Communication Auteurs : Sander Varbla, Auteur ; Raido Puust, Auteur ; Artu Ellmann, Auteur Année de publication : 2021 Article en page(s) : pp 477 - 492 Note générale : Bibliographie Langues : Anglais (eng) Descripteur : [Vedettes matières IGN] Applications photogrammétriques [Termes IGN] données localisées 3D [Termes IGN] géoréférencement direct [Termes IGN] image captée par drone [Termes IGN] modèle 3D de l'espace urbain [Termes IGN] modélisation 3D du bâti BIM [Termes IGN] photogrammétrie aérienne [Termes IGN] point d'appui [Termes IGN] positionnement cinématique en temps réel [Termes IGN] précision centimétrique [Termes IGN] structure-from-motion Résumé : (Auteur) Regular as-built surveys have become a necessary input for building information modelling. Such large-scale 3D data capturing can be conducted effectively by combining structure-from-motion and unmanned aerial vehicles (UAV). Using a RTK-GNSS equipped UAV, 22 repeated weekly campaigns were conducted at two altitudes in various conditions. The photogrammetric approach yielded 3D models, which were compared to the terrestrial laser scanning based ground truth. Better than 2.8 cm geometry RMSE was consistently achieved using integrated georeferencing. It is concluded that the RTK-GNSS based georeferencing enables reaching better than 5 cm geometry accuracy by utilising at least one ground control point. Numéro de notice : A2021-912 Affiliation des auteurs : non IGN Thématique : IMAGERIE/URBANISME Nature : Article nature-HAL : ArtAvecCL-RevueIntern DOI : 10.1080/00396265.2020.1830544 Date de publication en ligne : 15/10/2020 En ligne : https://doi.org/10.1080/00396265.2020.1830544 Format de la ressource électronique : URL Article Permalink : https://documentation.ensg.eu/index.php?lvl=notice_display&id=99310 [article]

Validation of marine geoid models by utilizing hydrodynamic model and shipborne GNSS profiles / Sander Varbla in Marine geodesy, Vol 43 n° 2 (March 2020)  

Public [article]  inMarine geodesy > Vol 43 n° 2 (March 2020) . - pp 134 - 162 Titre : Validation of marine geoid models by utilizing hydrodynamic model and shipborne GNSS profiles Type de document : Article/Communication Auteurs : Sander Varbla, Auteur ; Artu Ellmann, Auteur ; Nicole Delpeche-Ellmann, Auteur Année de publication : 2020 Article en page(s) : pp 134 - 162 Note générale : bibliographie Langues : Anglais (eng) Descripteur : [Vedettes matières IGN] Géodésie physique [Termes IGN] Baltique, mer [Termes IGN] données marégraphiques [Termes IGN] force de gravitation [Termes IGN] geoïde marin [Termes IGN] instrument embarqué [Termes IGN] instrumentation GNSS [Termes IGN] levé gravimétrique [Termes IGN] navire [Termes IGN] niveau de la mer [Termes IGN] simulation hydrodynamique Résumé : (auteur) An essential role of the FAMOS international cooperation project is to obtain new marine gravity observations over the Baltic Sea for improving gravimetric geoid modelling. To achieve targeted 5 cm modelling accuracy, it is important to acquire new gravimetric data, as the existing data over some regions are inaccurate and sparse. As the accuracy of contemporary geoid models over marine areas remains unknown, it is important to evaluate geoid modelling outcome by independent data. Thus, this study presents results of a shipborne marine gravity and GNSS campaign for validation of existing geoid models conducted in the eastern section of the Baltic Sea. Challenging aspects for utilizing shipborne GNSS profiles tend to be with quantifying vessel’s attitude, processing of noise in the data and referencing to the required datum. Consequently, the novelty of this study is in the development of methodology that considers the above-mentioned challenges. In addition, tide gauge records in conjunction with an operational hydrodynamic model are used to identify offshore sea level dynamics during the marine measurements. The results show improvements in geoid modelling due to new marine gravimetric data. It is concluded that the marine GNSS profiles can potentially provide complementary constraints in problematic geoid modelling areas. Numéro de notice : A2020-051 Affiliation des auteurs : non IGN Thématique : POSITIONNEMENT Nature : Article DOI : 10.1080/01490419.2019.1701153 Date de publication en ligne : 20/01/2020 En ligne : https://doi.org/10.1080/01490419.2019.1701153 Format de la ressource électronique : url article Permalink : https://documentation.ensg.eu/index.php?lvl=notice_display&id=94918 [article]