Détail de l'auteur
Auteur Shaoguang Xu |
Documents disponibles écrits par cet auteur (1)
![](./images/expand_all.gif)
![](./images/collapse_all.gif)
![Tris disponibles](./images/orderby_az.gif)
An efficient method to compensate receiver clock jumps in real-time precise point positioning / Shaoguang Xu in Remote sensing, vol 14 n° 20 (October-2 2022)
![]()
[article]
Titre : An efficient method to compensate receiver clock jumps in real-time precise point positioning Type de document : Article/Communication Auteurs : Shaoguang Xu, Auteur ; Jialu Long, Auteur ; Jinling Wang, Auteur ; et al., Auteur Année de publication : 2022 Article en page(s) : n° 5222 Note générale : bibliographie Langues : Anglais (eng) Descripteur : [Vedettes matières IGN] Géodésie spatiale
[Termes IGN] ambiguïté entière
[Termes IGN] décalage d'horloge
[Termes IGN] erreur de positionnement
[Termes IGN] glissement de cycle
[Termes IGN] horloge du récepteur
[Termes IGN] phase
[Termes IGN] positionnement cinématique en temps réel
[Termes IGN] positionnement par GNSS
[Termes IGN] positionnement ponctuel précis
[Termes IGN] retard troposphérique zénithal
[Termes IGN] temps réelRésumé : (auteur) In global navigation satellite systems (GNSSs)-based positioning, user receiver clock jump is a common phenomenon on the low-cost receiver clocks and can break the continuity of observation time tag, carrier phase and pseudo range. The discontinuity may affect precise point positioning-related parameter estimation, including receiver clock error, position, troposphere and ionosphere parameters. It is important to note that these parameters can be used for timing, positioning, atmospheric inversion and so on. In response to this problem, the receiver clock jumps are divided into two types. The first one can be expressed by the carrier phase and pseudo range having the same scale jump, and the second one is that they are having different scale jumps. For the first type, if a small priori variance of receiver clock error is provided, it can affect the accuracy of ionospheric delay estimation both in static and kinematic mode, while in the latter mode, it also affects position estimation. However, if large process noise is provided, numerical problems may arise since other parameters’ process noises are usually small, it is proposed to use the single point positioning with pseudo ranges to provide a priori value of receiver clock error, and an empiric value is assigned to its prior variance, this handle can avoid the above problems. For the second type, instead of compensating so many raw observations in the traditional methods, it is proposed to compensate the ambiguities at the clock jump epochs only in a new method. The new method corrects the Melbourne–Wubbena (MW) combination firstly in order to avoid the misjudging of cycle slips for current epoch, and the second step is to compensate the corresponding ambiguities, then, after Kalman filtering, the MW and its mean should be corrected back in order to avoid the misjudging of cycle slips at the next epoch. This approach has the advantage of handling the clock jump epoch-wise and can avoid correcting the rest of the observations as the traditional methods used to. With the numerical validation examples both in static and kinematic modes, it shows the new method is simple but efficient for real time precise point positioning (PPP). Numéro de notice : A2022-792 Affiliation des auteurs : non IGN Thématique : POSITIONNEMENT Nature : Article DOI : 10.3390/rs14205222 Date de publication en ligne : 19/10/2022 En ligne : https://doi.org/10.3390/rs14205222 Format de la ressource électronique : URL article Permalink : https://documentation.ensg.eu/index.php?lvl=notice_display&id=101909
in Remote sensing > vol 14 n° 20 (October-2 2022) . - n° 5222[article]