Centre dedocumentation
scientifique

Enhanced trajectory estimation of mobile laser scanners using aerial images / Zille Hussnain in ISPRS Journal of photogrammetry and remote sensing, vol 173 (March 2021)  

Public [article]  inISPRS Journal of photogrammetry and remote sensing > vol 173 (March 2021) . - pp 66 - 78 Titre : Enhanced trajectory estimation of mobile laser scanners using aerial images Type de document : Article/Communication Auteurs : Zille Hussnain, Auteur ; Sander J. Oude Elberink, Auteur ; M. George Vosselman, Auteur Année de publication : 2021 Article en page(s) : pp 66 - 78 Note générale : bibliographie Langues : Anglais (eng) Descripteur : [Vedettes matières IGN] Lasergrammétrie [Termes IGN] appariement de points [Termes IGN] atténuation du signal [Termes IGN] balayage laser [Termes IGN] canyon urbain [Termes IGN] centrale inertielle [Termes IGN] données lidar [Termes IGN] erreur [Termes IGN] image captée par drone [Termes IGN] mesurage par GNSS [Termes IGN] semis de points [Termes IGN] trajectoire (véhicule non spatial) [Termes IGN] trajet multiple Résumé : (auteur) Multipath effects and signal obstruction by buildings in urban canyons can lead to inaccurate GNSS measurements and therefore errors in the estimated trajectory of Mobile Laser Scanning (MLS) systems; consequently, derived point clouds are distorted and lose spatial consistency. We obtain decimetre-level trajectory accuracy making use of corresponding points between the MLS data and aerial images with accurate exterior orientations instead of using ground control points. The MLS trajectory is estimated based on observation equations resulting from these corresponding points, the original IMU observations, and soft constraints on the pitch and yaw rotations of the vehicle. We analyse the quality of the trajectory enhancement under several conditions where the experiments were designed to test the influence of the number and quality of corresponding points and to test different settings for a B-spline representation of the vehicle trajectory. The method was tested on two independently acquired MLS datasets in Rotterdam by enhancing the trajectories and evaluating them using checkpoints. The RMSE values of the original GNSS/IMU based Kalman filter results at the checkpoints were 0.26 m, 0.30 m, and 0.47 m for the X-, Y- and Z-coordinates in the first dataset and 1.10 m, 1.51 m, and 1.81 m in the second dataset. The latter dataset was recorded with a lower quality IMU in an area with taller buildings. After trajectory adjustment these RMSE values were reduced to 0.09 m, 0.11 m, and 0.16 m for the first dataset and 0.12 m, 0.14 m, and 0.18 m for the second dataset. The results confirmed that, if sufficient tie points between the point cloud and aerial imagery are available, the method supports geo-referencing of MLS point clouds in urban canyons with a near-decimetre accuracy. Numéro de notice : A2021-102 Affiliation des auteurs : non IGN Thématique : IMAGERIE Nature : Article nature-HAL : ArtAvecCL-RevueIntern DOI : 10.1016/j.isprsjprs.2021.01.005 Date de publication en ligne : 17/01/2021 En ligne : https://doi.org/10.1016/j.isprsjprs.2021.01.005 Format de la ressource électronique : url article Permalink : https://documentation.ensg.eu/index.php?lvl=notice_display&id=96877 [article]

Réservation

Réserver ce document

Exemplaires (3)

Code-barres	Cote	Support	Localisation	Section	Disponibilité
081-2021031	SL	Revue	Centre de documentation	Revues en salle	Disponible
081-2021033	DEP-RECP	Revue	LaSTIG	Dépôt en unité	Exclu du prêt
081-2021032	DEP-RECF	Revue	Nancy	Dépôt en unité	Exclu du prêt

Automatic extraction of accurate 3D tie points for trajectory adjustment of mobile laser scanners using aerial imagery / Zille Hussnain in ISPRS Journal of photogrammetry and remote sensing, vol 154 (August 2019)  

Public [article]  inISPRS Journal of photogrammetry and remote sensing > vol 154 (August 2019) . - pp 41 - 58 Titre : Automatic extraction of accurate 3D tie points for trajectory adjustment of mobile laser scanners using aerial imagery Type de document : Article/Communication Auteurs : Zille Hussnain, Auteur ; Sander J. Oude Elberink, Auteur ; M. George Vosselman, Auteur ; M. George Vosselman, Auteur Année de publication : 2019 Article en page(s) : pp 41 - 58 Note générale : Bibliographie Langues : Anglais (eng) Descripteur : [Vedettes matières IGN] Lasergrammétrie [Termes IGN] appariement de points [Termes IGN] données lidar [Termes IGN] données localisées 3D [Termes IGN] extraction automatique [Termes IGN] extraction de points [Termes IGN] image aérienne [Termes IGN] points homologues [Termes IGN] Rotterdam (Pays-Bas) [Termes IGN] semis de points [Termes IGN] télémètre laser terrestre [Termes IGN] télémétrie laser mobile Résumé : (Auteur) Poor GNSS measurements in urban areas caused by blocked GNSS signals and multi-path is a well-known problem, which leads to an inaccurate trajectory estimation of Mobile Laser Scanning (MLS) platforms. Consequently, the MLS point cloud contains positioning errors. This paper presents a new method for the automatic extraction of accurate 3D tie points for the trajectory adjustment of MLS platforms in GNSS denied or troubled areas. The new method relies on aerial imagery as a reliable external source of reference provided that accurate exterior orientation parameters are available. Accordingly, one of the main objectives is to register the mobile laser scanning point cloud with corresponding aerial images. The matches between aerial images are used to obtain 3D tie points by forward intersection. By also determining the corresponding locations in the point cloud we obtain a 3D-3D correspondence between the MLS point cloud and the aerial images. In the future, the obtained 3D-3D correspondences will be used for trajectory adjustment. Our automatic tie point extraction procedure is tested on two independent MLS point clouds. The point clouds were acquired by two different platforms in Rotterdam. The aerial imagery of the same area was acquired at a different time. We evaluated the matching results for both datasets and concluded that the new procedure reliably extracted the 3D tie points for 55% of the tiles of the size of 90 m from the first MLS dataset. In the second dataset, 60% of the tiles of size 74 m yielded reliable 3D tie points. It is not necessary to successfully register all tiles because the results of this work will be used for the trajectory adjustment and the IMU can reliably support the positioning for small intervals. Numéro de notice : A2019-263 Affiliation des auteurs : non IGN Thématique : IMAGERIE Nature : Article nature-HAL : ArtAvecCL-RevueIntern DOI : 10.1016/j.isprsjprs.2019.05.010 Date de publication en ligne : 04/06/2019 En ligne : https://doi.org/10.1016/j.isprsjprs.2019.05.010 Format de la ressource électronique : URL Article Permalink : https://documentation.ensg.eu/index.php?lvl=notice_display&id=93076 [article]

Réservation

Réserver ce document

Exemplaires (3)

Code-barres	Cote	Support	Localisation	Section	Disponibilité
081-2019081	RAB	Revue	Centre de documentation	En réserve 3L	Disponible
081-2019083	DEP-RECP	Revue	LaSTIG	Dépôt en unité	Exclu du prêt
081-2019082	DEP-RECF	Revue	Nancy	Dépôt en unité	Exclu du prêt