Détail de l'auteur
Auteur Rudolf Staiger |
Documents disponibles écrits par cet auteur (2)
Ajouter le résultat dans votre panier Affiner la recherche Interroger des sources externes
Le contrôle des instruments géodésiques / Rudolf Staiger in XYZ, n° 99 (juin - août 2004)
[article]
Titre : Le contrôle des instruments géodésiques Type de document : Article/Communication Auteurs : Rudolf Staiger, Auteur ; Olivier Reis, Traducteur Année de publication : 2004 Article en page(s) : pp 39 - 46 Langues : Français (fre) Descripteur : [Vedettes matières IGN] Géodésie
[Termes IGN] chambre métrique
[Termes IGN] contrôle métrologique
[Termes IGN] distancemètre
[Termes IGN] instrument de géodésie
[Termes IGN] niveau numérique
[Termes IGN] précision géométrique (imagerie)
[Termes IGN] récepteur GPS
[Termes IGN] tachéomètre électroniqueRésumé : (Auteur) Une mission primordiales de l'ingénieur géomètre consiste à déterminer des points dans un système de référence à une, deux ou trois dimensions. Il recourt pour cela à une large gamme d'instruments dont les principaux sont les niveaux numériques, les tachéomètres électroniques, les chambres métriques numériques et les récepteurs GPS. Numéro de notice : A2004-271 Affiliation des auteurs : non IGN Thématique : POSITIONNEMENT Nature : Article DOI : sans Permalink : https://documentation.ensg.eu/index.php?lvl=notice_display&id=26798
in XYZ > n° 99 (juin - août 2004) . - pp 39 - 46[article]Exemplaires(1)
Code-barres Cote Support Localisation Section Disponibilité 112-04021 RAB Revue Centre de documentation En réserve L003 Exclu du prêt Theoretische Untersuchungen zum Einsatz von Industriemeßsystemen / Rudolf Staiger (1988)
Titre : Theoretische Untersuchungen zum Einsatz von Industriemeßsystemen Titre original : A Theoretical Analysis of Industrial Triangulation Systems Type de document : Thèse/HDR Auteurs : Rudolf Staiger, Auteur Editeur : Munich : Bayerische Akademie der Wissenschaften Année de publication : 1988 Collection : DGK - C Sous-collection : Dissertationen num. 340 Importance : 148 p. Format : 21 x 30 cm ISBN/ISSN/EAN : 978-3-7696-9388-1 Note générale : Bibliographie Langues : Allemand (ger) Descripteur : [Vedettes matières IGN] Systèmes de référence et réseaux
[Termes IGN] compensation par faisceaux
[Termes IGN] données localisées 3D
[Termes IGN] optimisation (mathématiques)
[Termes IGN] réseau de premier ordre
[Termes IGN] temps réel
[Termes IGN] triangulation (méthode de mesure)Index. décimale : 30.10 Systèmes de référence et réseaux géodésiques Résumé : (Auteur) The subject of the research presented in this thesis is an investigation of three-dimensional intersection, as applied to industrial measurement Systems. Such Systems consist of at least two electronic theodolites connected directly to a computer. Since data is recorded fully automatically, real-time triangulation is possible.
Firstly, the relevant computational models for close-range intersection are examined and a rigorous three-dimensional adjustment is discussed in detail. A two-step procedure for real-time triangulation is then developed, which is based on a sequential network adjustment. This enables observations to be immediately processed without the need to invert the full normal matrix. The result is a strictly correct mathematical solution for the current network. The treatment of theodolite observations by a photogrammetric bundle adjustment is also briefly discussed.
Secondly, some additional aspects of instrumentation and setting-up procedures are evaluated. Particular attention is given to reciprocal observation and the determination of the horizontal and vertical separation of the theodolites.
Analysis and optimisation of three-dimensional intersection is presented in a number of detailed steps. The most appropriate method for the zero order design (selection of datum) is a free-net adjustment, which minimizes the trace of the object points only. The greatest scope for optimising the network exists in the first order design (network configuration). After an examination of errors in the base-length, an analytical technique for selecting an optimal network is explained. This suggests a new method of executing observations, in which the theodolites are positioned vertically above one another, rather than in the horizontal plane. Second order design (selection of observational weights) has no real importance for three-dimensional intersection. In contrast, significant improvements are possible in third order design with the aid of additional theodolite positions and/or additional scale lengths.Numéro de notice : 28106 Affiliation des auteurs : non IGN Thématique : POSITIONNEMENT Nature : Thèse étrangère Permalink : https://documentation.ensg.eu/index.php?lvl=notice_display&id=63453 Réservation
Réserver ce documentExemplaires(2)
Code-barres Cote Support Localisation Section Disponibilité 28106-01 30.10 Livre Centre de documentation Géodésie Disponible 28106-02 30.10 Livre Centre de documentation Géodésie Disponible