Descripteur
Documents disponibles dans cette catégorie (128)



Etendre la recherche sur niveau(x) vers le bas
Monitoring the deformation of a concrete dam: a case study on the Deriner Dam, Artvin, Turkey / Berkant Konakoglu in Geomatics, Natural Hazards and Risk, vol 11 n° 1 (2020)
![]()
[article]
Titre : Monitoring the deformation of a concrete dam: a case study on the Deriner Dam, Artvin, Turkey Type de document : Article/Communication Auteurs : Berkant Konakoglu, Auteur ; Leyla Cakir, Auteur ; Volkan Yilmaz, Auteur Année de publication : 2020 Article en page(s) : pp 160 - 177 Note générale : bibliographie Langues : Anglais (eng) Descripteur : [Vedettes matières IGN] Topographie moderne
[Termes IGN] barrage
[Termes IGN] déformation d'édifice
[Termes IGN] données GNSS
[Termes IGN] réseau géodésique
[Termes IGN] surveillance d'ouvrage
[Termes IGN] transformation IWST
[Termes IGN] TurquieRésumé : (auteur) This paper investigates the behaviour of the double-curvature Deriner dam, which is in the operation phase and also one of the highest dams in the world. In order to determine the displacements, a geodetic network consisting of twelve reference and seven object points was measured in four periods by means of the Global Navigation Satellite Systems (GNSS) data. The θ2-Criteria method was used to determine the extent of the deformation. The deformation analysis results based on the GNSS measurements revealed significant horizontal and vertical displacements on the object points on the dam crest. Hence, the vertical displacements found based on the GNSS measurements can be considered erroneous, because they are greater than expected. This may be due to the narrow topography of the valley. Another conclusion drawn from the results is that there is a strong relationship between the change in the reservoir water level and horizontal deformations, as can be seen from the horizontal deformation vectors. Numéro de notice : A2020-568 Affiliation des auteurs : non IGN Thématique : POSITIONNEMENT Nature : Article nature-HAL : ArtAvecCL-RevueIntern DOI : 10.1080/19475705.2020.1714755 Date de publication en ligne : 28/01/2020 En ligne : https://doi.org/10.1080/19475705.2020.1714755 Format de la ressource électronique : URL article Permalink : https://documentation.ensg.eu/index.php?lvl=notice_display&id=95894
in Geomatics, Natural Hazards and Risk > vol 11 n° 1 (2020) . - pp 160 - 177[article]
[article]
Titre : Les pérégrinations d'un topographe en Chine Type de document : Article/Communication Auteurs : Bernard Flacelière, Auteur Année de publication : 2020 Article en page(s) : pp 61 - 67 Langues : Français (fre) Descripteur : [Vedettes matières IGN] Topographie moderne
[Termes IGN] géodésie tridimensionnelle
[Termes IGN] hydrocarbure
[Termes IGN] mission de terrain
[Termes IGN] Mongolie intérieure (Chine)
[Termes IGN] point géodésique
[Termes IGN] système de référence géodésique
[Termes IGN] topographeRésumé : (auteur) C'est avec un clin d'oeil à Jules Verne et à son roman d'aventures paru en 1879, les Tribulations d'unChinois en Chine, que le topographe rapporte ici les quelques semaines vécues en Mongolie-Intérieure, à Chengdu au Sichuan et enfin à la capitale Beijing (figure 1). Une compagnie française d'exploration et de production d'hydrocarbures ayant obtenu de la part des autorités chinoises le contrat de développement d'un champ gazier déjà découvert, une campagne de sismique terrestre 3D est programmée, à suivre par des forages d'appréciation puis de développement et enfin la construction d'infrastructures dont des pistes, routes, gazoducs, centres de traitement et d'expédition. Des travaux
géodésiques sont donc nécessaires, avec rattachement au système géodésique officiel, établissement d'un réseau de détail et relevés des installations existantes. Comme dans de nombreux pays ayant grandi dans la culture du secret des informations géographiques, le topographe découvrira que la géodésie en Chine n'est pas une sinécure.Numéro de notice : A2020-555 Affiliation des auteurs : non IGN Thématique : POSITIONNEMENT Nature : Article nature-HAL : ArtSansCL DOI : sans Permalink : https://documentation.ensg.eu/index.php?lvl=notice_display&id=95824
in XYZ > n° 164 (septembre 2020) . - pp 61 - 67[article]Réservation
Réserver ce documentExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 112-2020031 RAB Revue Centre de documentation En réserve L003 Disponible Predicting displacement of bridge based on CEEMDAN-KELM model using GNSS monitoring data / Qian Fan in Journal of applied geodesy, vol 14 n° 3 (July 2020)
![]()
[article]
Titre : Predicting displacement of bridge based on CEEMDAN-KELM model using GNSS monitoring data Type de document : Article/Communication Auteurs : Qian Fan, Auteur ; Xiaolin Meng, Auteur ; Dinh Tung Nguyen, Auteur ; Yilin Xie, Auteur ; Jiayong Yu, Auteur Année de publication : 2020 Article en page(s) : pp 253 – 261 Note générale : bibliographie Langues : Anglais (eng) Descripteur : [Vedettes matières IGN] Topographie moderne
[Termes IGN] apprentissage automatique
[Termes IGN] combinaison linéaire
[Termes IGN] données GNSS
[Termes IGN] méthode fondée sur le noyau
[Termes IGN] pont
[Termes IGN] prévention des risques
[Termes IGN] série temporelle
[Termes IGN] surveillance d'ouvrageRésumé : (auteur) Bridges are critical to economic and social development of a country. In order to ensure the safe operation of bridges, it is of great significance to accurately predict displacement of monitoring points from bridge Structural Health System (SHM). In the paper, a CEEMDAN-KELM model is proposed to improve the accuracy of displacement prediction of bridge. Firstly, the original displacement monitoring time series of bridge is accurately and effectively decomposed into multiple components called intrinsic mode functions (IMFs) and one residual component using a method named complete ensemble empirical mode decomposition with adaptive noise (CEEMDAN). Then, these components are forecasted by establishing appropriate kernel extreme learning machine (KELM) prediction models, respectively. At last, the prediction results of all components including residual component are summed as the final prediction results. A case study using global navigation satellite system (GNSS) monitoring data is used to illustrate the feasibility and validity of the proposed model. Practical results show that prediction accuracy using CEEMDAN-KELM model is superior to BP neural network model, EMD-ELM model and EMD-KELM model in terms of the same monitoring data. Numéro de notice : A2020-396 Affiliation des auteurs : non IGN Thématique : POSITIONNEMENT Nature : Article nature-HAL : ArtAvecCL-RevueIntern DOI : 10.1515/jag-2019-0057 Date de publication en ligne : 27/03/2020 En ligne : https://doi.org/10.1515/jag-2019-0057 Format de la ressource électronique : url article Permalink : https://documentation.ensg.eu/index.php?lvl=notice_display&id=95431
in Journal of applied geodesy > vol 14 n° 3 (July 2020) . - pp 253 – 261[article]Rethinking error estimations in geospatial data: the correct way to determine product accuracy / Qassim Abdullah in Photogrammetric Engineering & Remote Sensing, PERS, vol 86 n° 7 (July 2020)
![]()
[article]
Titre : Rethinking error estimations in geospatial data: the correct way to determine product accuracy Type de document : Article/Communication Auteurs : Qassim Abdullah, Auteur Année de publication : 2020 Article en page(s) : pp 397-403 Note générale : Bibliographie Langues : Anglais (eng) Descripteur : [Vedettes matières IGN] Topographie moderne
[Termes IGN] cartographie numérique
[Termes IGN] détection d'erreur
[Termes IGN] données localisées
[Termes IGN] ellipsoïde (géodésie)
[Termes IGN] estimation de précision
[Termes IGN] nivellement direct
[Termes IGN] point d'appui
[Termes IGN] réalité de terrain
[Termes IGN] système de référence géodésique
[Termes IGN] système de référence localRésumé : (Auteur) Numéro de notice : A2020-380 Affiliation des auteurs : non IGN Thématique : GEOMATIQUE Nature : Article nature-HAL : ArtAvecCL-RevueIntern DOI : 10.14358/PERS.86.7.397 Date de publication en ligne : 01/07/2020 En ligne : https://doi.org/10.14358/PERS.86.7.397 Format de la ressource électronique : URL Article Permalink : https://documentation.ensg.eu/index.php?lvl=notice_display&id=95425
in Photogrammetric Engineering & Remote Sensing, PERS > vol 86 n° 7 (July 2020) . - pp 397-403[article]Réservation
Réserver ce documentExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 105-2020071 SL Revue Centre de documentation Revues en salle Disponible Analysis of dam deformation with robust weight functions / Berkant Konakoglu in Geodetski vestnik, vol 64 n° 2 (June - August 2020)
![]()
[article]
Titre : Analysis of dam deformation with robust weight functions Type de document : Article/Communication Auteurs : Berkant Konakoglu, Auteur Année de publication : 2020 Article en page(s) : 16 p. Note générale : bibliographie Langues : Anglais (eng) Slovène (slv) Descripteur : [Vedettes matières IGN] Topographie moderne
[Termes IGN] barrage
[Termes IGN] déformation d'édifice
[Termes IGN] données GNSS
[Termes IGN] méthode robuste
[Termes IGN] surveillance d'ouvrage
[Termes IGN] surveillance géologique
[Termes IGN] TurquieRésumé : (auteur)Civil engineering structures (e.g., bridges, dams) are exposed to deformation under the influence of various factors such as water level changes, landslides, tectonic phenomena, etc. These deformations must be periodically monitored. Various deformation analysis approaches have been developed to describe the behaviour of a structure or natural process. The most significant task in deformation analysis is to correctly classify whether the points are stable or unstable. In this study, various robust weight functions for determination of stable/unstable points were applied to the Deriner Dam using GNSS (Global Navigation Satellite System) data measured over four different periods. The robust weight functions examined included the Andrews, Beaton−Tukey, Cauchy, Danish, Fair, German−McClure, Hampel, Huber, L1, and L1−L2. Test results were evaluated, and the performances of the different deformation analysis methods were determined. It was concluded that the horizontal deformations based on GNSS data determined by these robust weight functions were in good agreement with each other, except for the L1−L2. The results of all approaches were also compared with the results of the θ2–Criteria method. According to the results obtained, although the θ2–Criteria and the robust methods yielded nearly similar results, the results of the θ2–Criteria method were thought to be more reliable. Numéro de notice : A2020-404 Affiliation des auteurs : non IGN Thématique : POSITIONNEMENT Nature : Article nature-HAL : ArtAvecCL-RevueNat DOI : 10.15292/geodetski-vestnik.2020.02.198-213 Date de publication en ligne : 12/06/2020 En ligne : http://dx.doi.org/10.15292/geodetski-vestnik.2020.02.198-213 Format de la ressource électronique : URL article Permalink : https://documentation.ensg.eu/index.php?lvl=notice_display&id=95457
in Geodetski vestnik > vol 64 n° 2 (June - August 2020) . - 16 p.[article]Réservation
Réserver ce documentExemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité 139-2020021 RAB Revue Centre de documentation En réserve L003 Disponible PermalinkPermalinkSurveillance de santé structurale des ouvrages d’art incluant les systèmes de positionnement par satellites / Camille Favre in XYZ, n° 150 (mars - mai 2017)
PermalinkDétermination de la constante d'addition d'une station totale sans base de calibration / Joël Van Cranenbroeck in XYZ, n° 149 (décembre 2016 - février 2017)
PermalinkTotal stations: the surveyor's workhorse / Mathias Lemmens in GIM international [en ligne], vol 30 n° 10 (October 2016)
PermalinkThe surveyor’s role in reducing risk / Chryssy Potsiou in GEO: Geoconnexion international, vol 15 n° 8 (September 2016)
PermalinkUnderground incrementally deployed magneto-inductive 3-D positioning network / Traian E. Abrudan in IEEE Transactions on geoscience and remote sensing, vol 54 n° 8 (August 2016)
PermalinkNégocier en conscience le virage numérique / Marielle Mayo in Géomètre, n° 2138 (juillet - août 2016)
PermalinkLe 12ème Forum de la topographie : topographie et BIM / Tania Landes in XYZ, n° 147 (juin - août 2016)
PermalinkDéveloppement d'une application Android pour communiquer avec une station totale Leica à l'aide d'une interface GeoCOM : Travail de brevet Technicien en géomatique / D. Meister in Géomatique suisse, vol 114 n° 6 (juin 2016)
Permalink