Centre dedocumentation
scientifique

Production of orthophoto map using mobile photogrammetry and comparative assessment of cost and accuracy with satellite imagery for corridor mapping: a case study in Manesar, Haryana, India / Manuj Dev in Annals of GIS, vol 29 n° 1 (January 2023)  

Public [article]  inAnnals of GIS > vol 29 n° 1 (January 2023) . - pp 163 - 176 Titre : Production of orthophoto map using mobile photogrammetry and comparative assessment of cost and accuracy with satellite imagery for corridor mapping: a case study in Manesar, Haryana, India Type de document : Article/Communication Auteurs : Manuj Dev, Auteur ; Shetru M. Veerabhadrappa, Auteur ; Ashutosh Kainthola, Auteur ; et al., Auteur Année de publication : 2023 Article en page(s) : pp 163 - 176 Note générale : bibliographie Langues : Anglais (eng) Descripteur : [Vedettes matières IGN] Photogrammétrie [Termes IGN] aérotriangulation [Termes IGN] analyse comparative [Termes IGN] image panoramique [Termes IGN] image satellite [Termes IGN] modèle stéréoscopique [Termes IGN] orthoimage [Termes IGN] orthophotocarte [Termes IGN] point d'appui [Termes IGN] positionnement cinématique en temps réel [Termes IGN] système de numérisation mobile Résumé : (auteur) The study aims to find a low-cost alternate technology to get imagery, using mobile platform, and produce digital orthophoto for corridor mapping, with a higher degree of accuracy and which can reduce the lag time of acquisition of data. The present study uses digital single-lens reflex cameras, mounted on a mobile vehicle, and acquisition of data in the video format rather than still photographs, as traditionally used in mobile mapping systems. The videos are used to create a set of images and orthophotos. A widespread ground control points were recorded in the study area, using the global navigation satellite system receiver, which measured the control points in real-time kinematic mode. Generation of digital orthophoto has been completed using the captured mobile imagery and ground control point. Furthermore, procurement of satellite imagery and aerial triangulation using ground control points have been done. While comparing the planimetric accuracy of orthophoto against satellite imagery using the ground control points, the achieved root mean square error value of produced orthophoto is 0.171 m in X axis and 0.205 m in Y axis. However, for Cartosat -1 satellite imagery, the RMSE value for X is 1.22 m and for Y is 1.98 m. This research proposes the alternate low-cost mobile mapping method to capture the imagery for orthophoto production. The cost of orthophoto production from mobile image was found 77% cheaper than the orthophoto cost from fresh/latest satellite imagery procurement, while the overall production was 70% cost-effective than the orthophoto maps made from archived imagery. Numéro de notice : A2023-161 Affiliation des auteurs : non IGN Thématique : IMAGERIE Nature : Article DOI : 10.1080/19475683.2022.2141853 Date de publication en ligne : 12/11/2022 En ligne : https://doi.org/10.1080/19475683.2022.2141853 Format de la ressource électronique : URL article Permalink : https://documentation.ensg.eu/index.php?lvl=notice_display&id=102864 [article]

Automatic extraction of building geometries based on centroid clustering and contour analysis on oblique images taken by unmanned aerial vehicles / Leilei Zhang in International journal of geographical information science IJGIS, vol 36 n° 3 (March 2022)  

Public [article]  inInternational journal of geographical information science IJGIS > vol 36 n° 3 (March 2022) . - pp 453 - 475 Titre : Automatic extraction of building geometries based on centroid clustering and contour analysis on oblique images taken by unmanned aerial vehicles Type de document : Article/Communication Auteurs : Leilei Zhang, Auteur ; Guoxin Wang, Auteur ; Weijian Sun, Auteur Année de publication : 2022 Article en page(s) : pp 453 - 475 Note générale : bibliographie Langues : Anglais (eng) Descripteur : [Vedettes matières IGN] Traitement d'image optique [Termes IGN] analyse de groupement [Termes IGN] classification barycentrique [Termes IGN] classification non dirigée [Termes IGN] détection de contours [Termes IGN] détection du bâti [Termes IGN] extraction automatique [Termes IGN] image captée par drone [Termes IGN] image oblique [Termes IGN] modèle numérique de surface [Termes IGN] orthophotocarte [Termes IGN] précision géométrique (imagerie) Résumé : (auteur) This paper introduces a method based on centroid clustering and contour analysis to extract area and height measurements on buildings from the 3D model generated by oblique images. The method comprises three steps: (1) extract the contour plane from the fused data of the digital surface model (DSM) and digital orthophoto map (DOM); (2) identify building contour clusters based on the number of centroids contained in each category determined by mean-shift centroid clustering; (3) remove the mis-identified contours in a given building contour cluster by a contour analysis and obtain the geometric information of the building using map algebra. The proposed approach was tested against four datasets. Compared with other results, the detection has effective completeness, correctness, quality, and higher geometric accuracy. The maximum average relative error of building height and area extraction is less than 8%. The method is fast for a large-scale collection of building attributes and improves the applicability of oblique photography in GIS. Numéro de notice : A2022-205 Affiliation des auteurs : non IGN Thématique : IMAGERIE Nature : Article nature-HAL : ArtAvecCL-RevueIntern DOI : 10.1080/13658816.2021.1937632 Date de publication en ligne : 14/06/2021 En ligne : https://doi.org/10.1080/13658816.2021.1937632 Format de la ressource électronique : URL article Permalink : https://documentation.ensg.eu/index.php?lvl=notice_display&id=100020 [article]

Réservation

Réserver ce document

Exemplaires (1)

Code-barres	Cote	Support	Localisation	Section	Disponibilité
079-2022031	SL	Revue	Centre de documentation	Revues en salle	Disponible

Complexity-based matching between image resolution and map scale for multiscale image-map generation / Qian Peng in International journal of geographical information science IJGIS, vol 35 n° 10 (October 2021)  

Public [article]  inInternational journal of geographical information science IJGIS > vol 35 n° 10 (October 2021) . - pp 1951 - 1974 Titre : Complexity-based matching between image resolution and map scale for multiscale image-map generation Type de document : Article/Communication Auteurs : Qian Peng, Auteur ; Zhilin Li, Auteur ; Jun Chen, Auteur ; et al., Auteur Année de publication : 2021 Article en page(s) : pp 1951 - 1974 Note générale : bibliographie Langues : Anglais (eng) Descripteur : [Termes IGN] appariement de lignes [Termes IGN] échelle cartographique [Termes IGN] Hong-Kong [Termes IGN] niveau de détail [Termes IGN] objet géographique linéaire [Termes IGN] orthophotocarte [Termes IGN] précision cartographique [Termes IGN] précision planimétrique [Termes IGN] résolution globale (imagerie) [Termes IGN] symbole graphique [Termes IGN] visualisation multiéchelle [Vedettes matières IGN] Généralisation Résumé : (auteur) An image-map is a compromise between an image and a map. The quality of such maps is affected by several factors, such as (a) the matching between the features on images and the graphic symbols from maps, (b) the complexity of background images, and (c) the representation of graphic and text symbols on the images. This project deals with the first issue. The current solution is that the accuracy of images should satisfy the accuracy standard of maps. However, images with different resolutions can satisfy the standard for a specific map scale. This may lead to a situation in which the levels of detail (LoD) in images may not match the complexity of map features although the planimetric accuracy is matched. To solve this problem, we developed a complexity-based matching between the image resolution and map scale. More precisely, the matching is based on the complexity of line features. Experimental evaluations were conducted in 15 representative areas in Hong Kong using maps at seven scales and eight image resolutions. Results show that the proposed complexity-based method is capable of obtaining good matching between image resolution and map scale in terms of both accuracy and users’ preference. Numéro de notice : A2021-655 Affiliation des auteurs : non IGN Thématique : GEOMATIQUE Nature : Article nature-HAL : ArtAvecCL-RevueIntern DOI : 10.1080/13658816.2021.1885674 Date de publication en ligne : 12/04/2021 En ligne : https://doi.org/10.1080/13658816.2021.1885674 Format de la ressource électronique : URL article Permalink : https://documentation.ensg.eu/index.php?lvl=notice_display&id=98391 [article]

A methodology for producing realistic hill-shading map based on shaded relief map, digital orthophotographic map fusion and IHS transformation / Hongyun Zeng in Annals of GIS, vol 27 n° 4 (October 2021)  

Public [article]  inAnnals of GIS > vol 27 n° 4 (October 2021) . - pp 371 - 382 Titre : A methodology for producing realistic hill-shading map based on shaded relief map, digital orthophotographic map fusion and IHS transformation Type de document : Article/Communication Auteurs : Hongyun Zeng, Auteur ; Zhiqiang Xie, Auteur ; Jinqu Zhang, Auteur ; et al., Auteur Année de publication : 2021 Article en page(s) : pp 371 - 382 Note générale : bibliographie Langues : Anglais (eng) Descripteur : [Vedettes matières IGN] Cartographie [Termes IGN] données vectorielles [Termes IGN] effet d'ombre [Termes IGN] espace colorimétrique [Termes IGN] géomorphologie [Termes IGN] modèle numérique de surface [Termes IGN] ombre [Termes IGN] orthophotocarte [Termes IGN] représentation du relief [Termes IGN] teinte hypsométrique [Termes IGN] transformation intensité-teinte-saturation Résumé : (auteur) The traditional hill-shading map is usually produced from a digital elevation model (DEM) by using the method of hypsometric tinting, which is capable of demonstrating the changes in geomorphology by setting the colors for hill-shading. However, the disadvantage is obvious that the surface features of the terrain can only be utilized by putting vector data on the map. Hence, the terrain display effect will be altered, especially in the production of large-scale maps, for which the artistic effect will be greatly weakened. This paper proposes a solution to this problem. First, we transform the RGB color space of the Digital orthophotographic map (DOM) image into the intensity-hue-saturation (IHS) color space. Then, we calculate the new value of the intensity as I′ for each pixel of the shaded relief model (SRM) of the high-resolution remote sensing image. Finally, we replace the component I with the new component I′ and then proceed with the inverse IHS transform. The case study shows that an objective representation of the actual situation is presented in the mapping area, and the 3D performance capabilities are enhanced. This research indicates that when the method of fusing the processed SRM with the IHS color system is used, the optimum index factor (OIF) and entropy of the generated map are 41.26 and 12.05, respectively, which are much greater than for the results of the traditional method. In other words, the proposed method can greatly enhance the terrain effect. Numéro de notice : A2021-667 Affiliation des auteurs : non IGN Thématique : GEOMATIQUE Nature : Article DOI : 10.1080/19475683.2021.1921026 Date de publication en ligne : 04/05/2021 En ligne : https://doi.org/10.1080/19475683.2021.1921026 Format de la ressource électronique : URL article Permalink : https://documentation.ensg.eu/index.php?lvl=notice_display&id=98816 [article]

Hook, line and sinker / Jakub Karas in GEO: Geoconnexion international, vol 15 n° 7 (July - August 2016)

Public [article]  inGEO: Geoconnexion international > vol 15 n° 7 (July - August 2016) . - pp 42 - 43 Titre : Hook, line and sinker Type de document : Article/Communication Auteurs : Jakub Karas, Auteur Année de publication : 2016 Article en page(s) : pp 42 - 43 Langues : Anglais (eng) Descripteur : [Vedettes matières IGN] Applications photogrammétriques [Termes IGN] acquisition de données [Termes IGN] bathymétrie [Termes IGN] orthophotocarte [Termes IGN] République Tchèque Résumé : (éditeur) Annual lake discharges in the Czech Republic are a prime time to measure the lake bottoms – if you’re quick enough. Jakub Karas explains how he used a UAV to help create orthophotomaps and DTMs of the republic’s secondlargest lake in less than half a day. Numéro de notice : A2016-502 Affiliation des auteurs : non IGN Thématique : IMAGERIE Nature : Article DOI : sans Permalink : https://documentation.ensg.eu/index.php?lvl=notice_display&id=81525 [article]

SGM-based seamline determination for urban orthophoto mosaicking / Shiyan Pang in ISPRS Journal of photogrammetry and remote sensing, vol 112 (February 2016)  

Permalink

Fully automatic generation of geoinformation products with chinese zy-3 satellite imagery / Yongjun Zhang in Photogrammetric record, vol 29 n° 148 (December 2014 - February 2015)  

Permalink

Mixing, blending, merging or scrambling topographic maps and orthoimagery in geovisualizations ? / Charlotte Hoarau (2013)    

Permalink

L'orthophoto institutionnelle : grande facilité d'emploi et d'interprétation / Michel Kasser in Géomètre, vol 2002 n° 12 (décembre 2002)

Permalink

Ortho-rectified or geo-corrected: what's the difference? / S. Simmons in GEO:connexion, vol 1 n° 2 (february 2002)

Permalink

Image maps / Bertrand Galtier (01/07/1992)

Permalink

Digitale Technologie in der Kartographie, Wiener Symposium, 1988 / F. Mayer (1989)

Permalink

Satellite imagery and digital cartography / Jean Denègre (27/09/1988)

Permalink

Spatiocartes et cartographie de la végétation méditerranéenne / V. Barbaroussi (1988)

Permalink

Digital elevation models for the orthophoto maps / K.H. Bastian (05/01/1987)

Permalink