Descripteur



Etendre la recherche sur niveau(x) vers le bas
Relevé 3D et classification de nuages de points de patrimoine bâti / Arnadi Murtiyoso in XYZ, n° 164 (septembre 2020)
[article]
Titre : Relevé 3D et classification de nuages de points de patrimoine bâti Type de document : Article/Communication Auteurs : Arnadi Murtiyoso, Auteur Année de publication : 2020 Note générale : bibliographie Langues : Français (fre) Descripteur : [Vedettes matières IGN] Applications photogrammétriques
[Termes descripteurs IGN] Agisoft Photoscan
[Termes descripteurs IGN] contrôle qualité
[Termes descripteurs IGN] données lidar
[Termes descripteurs IGN] lasergrammétrie
[Termes descripteurs IGN] modélisation 3D
[Termes descripteurs IGN] monument historique
[Termes descripteurs IGN] patrimoine immobilier
[Termes descripteurs IGN] segmentation
[Termes descripteurs IGN] semis de pointsRésumé : (auteur) La documentation du patrimoine bâti a beaucoup évolué ces dernières années grâce au développement de nouveaux capteurs 3D et de nouvelles techniques de relevé 3D. Les données 3D contribuent à la création d'archives fiables et tangibles des sites et des monuments historiques. Vu l'importance des données 3D dans la documentation du patrimoine bâti, le contrôle de qualité est un aspect primordial qui devrait être abordé avant d'entreprendre le traitement du nuage de points. L'étude est ainsi divisée en deux parties. La première partie concerne principalement l'acquisition et le contrôle de qualité des données. Un point important sera l'intégration de la photogrammétrie et de la lasergrammétrie dans le contexte de la documentation d'un site historique à différentes échelles. La deuxième partie de l'article va aborder le traitement de nuages de points, plus particulièrement la segmentation et la classification de nuages de points. L'aspect échelles de notre approche est importante, car dans beaucoup de cas, un bâtiment remarquable se situe dans un quartier historique qui nécessite une segmentation échelles. En combinant ces deux parties, nous avons considéré l'ensemble du processus allant de l'acquisition de données 3D jusqu'à la segmentation et la classification en entités à plusieurs échelles. Numéro de notice : A2020-553 Affiliation des auteurs : non IGN Thématique : IMAGERIE Nature : Article nature-HAL : ArtSansCL DOI : sans Permalink : https://documentation.ensg.eu/index.php?lvl=notice_display&id=95821
in XYZ > n° 164 (septembre 2020)[article]Réservation
Réserver ce documentExemplaires (2)
Code-barres Cote Support Localisation Section Disponibilité 112-2020031 SL Revue Centre de documentation Revues en salle Disponible 112-2020032 SL Revue Centre de documentation Revues en salle Disponible An improved RANSAC algorithm for extracting roof planes from airborne lidar data / Sibel Canaz Sevgen in Photogrammetric record, vol 35 n° 169 (March 2020)
![]()
[article]
Titre : An improved RANSAC algorithm for extracting roof planes from airborne lidar data Type de document : Article/Communication Auteurs : Sibel Canaz Sevgen, Auteur ; Fevzi Karsli, Auteur Année de publication : 2020 Article en page(s) : pp 40 - 57 Note générale : Bibliographie Langues : Anglais (eng) Descripteur : [Vedettes matières IGN] Algorithmique
[Termes descripteurs IGN] bord décollé (toit)
[Termes descripteurs IGN] contrôle qualité
[Termes descripteurs IGN] détection du bâti
[Termes descripteurs IGN] données lidar
[Termes descripteurs IGN] données localisées 3D
[Termes descripteurs IGN] Ransac (algorithme)
[Termes descripteurs IGN] segmentation en régions
[Termes descripteurs IGN] semis de pointsRésumé : (Auteur) The extraction of building roof planes from lidar data has become a popular research topic with random sample consensus (RANSAC) being one of the most commonly adopted algorithms. RANSAC extracts full planes, which is problematic when there are other points outside the plane boundary but within the plane space. This study proposes an improved RANSAC (I‐RANSAC) algorithm by removing points that do not belong to the roof plane. I‐RANSAC selects a random point from the extracted roof plane and then searches for its neighbours within a given threshold to identify and remove outliers. The new algorithm was tested with 14 buildings from two datasets, where quality control measures showed significant improvement over standard RANSAC. Numéro de notice : A2020-131 Affiliation des auteurs : non IGN Thématique : IMAGERIE Nature : Numéro de périodique nature-HAL : ArtAvecCL-RevueIntern DOI : 10.1111/phor.12296 date de publication en ligne : 13/11/2019 En ligne : https://doi.org/10.1111/phor.12296 Format de la ressource électronique : URL Article Permalink : https://documentation.ensg.eu/index.php?lvl=notice_display&id=94815
in Photogrammetric record > vol 35 n° 169 (March 2020) . - pp 40 - 57[article]Micro-tasking as a method for human assessment and quality control in a geospatial data import / Atle Frenvik Sveen in Cartography and Geographic Information Science, vol 47 n° 2 (February 2020)
![]()
[article]
Titre : Micro-tasking as a method for human assessment and quality control in a geospatial data import Type de document : Article/Communication Auteurs : Atle Frenvik Sveen, Auteur ; Anne Sofie Strom Erichsen, Auteur ; Terje Midtbo, Auteur Année de publication : 2020 Article en page(s) : pp 141 - 152 Note générale : bibliographie Langues : Anglais (eng) Descripteur : [Vedettes matières IGN] Géomatique web
[Termes descripteurs IGN] algorithme de filtrage
[Termes descripteurs IGN] chevauchement
[Termes descripteurs IGN] contrôle qualité
[Termes descripteurs IGN] données localisées
[Termes descripteurs IGN] données localisées des bénévoles
[Termes descripteurs IGN] évaluation des données
[Termes descripteurs IGN] import de données
[Termes descripteurs IGN] OpenStreetMap
[Termes descripteurs IGN] précision des données
[Termes descripteurs IGN] production participativeRésumé : (auteur) Crowd-sourced geospatial data can often be enriched by importing open governmental datasets as long as they are up-to date and of good quality. Unfortunately, merging datasets is not straight forward. In the context of geospatial data, spatial overlaps pose a particular problem, as existing data may be overwritten when a naïve, automated import strategy is employed. For example: OpenStreetMap has imported over 100 open geospatial datasets, but the requirement for human assessment makes this a time-consuming process which requires experienced volunteers or training. In this paper, we propose a hybrid import workflow that combines algorithmic filtering with human assessment using the micro-tasking method. This enables human assessment without the need for complex tools or prior experience. Using an online experiment, we investigated how import speed and accuracy is affected by volunteer experience and partitioning of the micro-task. We conclude that micro-tasking is a viable method for massive quality assessment that does not require volunteers to have prior experience working with geospatial data. Numéro de notice : A2020-058 Affiliation des auteurs : non IGN Thématique : GEOMATIQUE Nature : Article nature-HAL : ArtAvecCL-RevueIntern DOI : 10.1080/15230406.2019.1659187 date de publication en ligne : 16/09/2020 En ligne : https://doi.org/10.1080/15230406.2019.1659187 Format de la ressource électronique : URL article Permalink : https://documentation.ensg.eu/index.php?lvl=notice_display&id=94575
in Cartography and Geographic Information Science > vol 47 n° 2 (February 2020) . - pp 141 - 152[article]
Titre : Geospatial recording and point cloud classification of heritage buildings Type de document : Thèse/HDR Auteurs : Arnadi Murtiyoso, Auteur ; Pierre Grussenmeyer, Directeur de thèse Editeur : Strasbourg : Université de Strasbourg Année de publication : 2020 Importance : 185 p. Format : 21 x 30 cm Note générale : bibliographie
Thèse présentée pour obtenir le grade de Docteur de l'Université de Strasbourg en Sciences de l'Ingénieur, Topographie et GéomatiqueLangues : Anglais (eng) Descripteur : [Vedettes matières IGN] Applications photogrammétriques
[Termes descripteurs IGN] acquisition de données
[Termes descripteurs IGN] contrôle qualité
[Termes descripteurs IGN] lasergrammétrie
[Termes descripteurs IGN] modélisation 3D
[Termes descripteurs IGN] monument historique
[Termes descripteurs IGN] patrimoine immobilier
[Termes descripteurs IGN] segmentation
[Termes descripteurs IGN] semis de pointsRésumé : (auteur) The documentation of built heritage has seen a significant development these past few decades due to advancements in new 3D sensors and 3D recording techniques. 3D data serve as reliable and tangible archive for historical sites and monuments. Since 3D data have such importance in the field of heritage documentation, quality control is paramount and must be performed before any point cloud processing is even planned to be conducted. The thesis is therefore divided into two parts. The first part concerned mainly the data acquisition and quality control of the point cloud data using the two techniques most commonly used, i.e. photogrammetry and laser scanning. A particular emphasis was also put on the integration of photogrammetry and laser scanning within the context of a multi-scalar documentation of a heritage site. The second part will address the processing of the resulting point cloud, particularly its segmentation and classification. The multi-scalar approach proposed in this thesis is an important point to note, as in many cases a historical building of interest is located in a historical neighbourhood; thus the requirement for a multi-scalar segmentation. By combining these two parts, the thesis had attempted to address the 3D workflow of heritage sites in a holistic manner, from the 3D data acquisition up to the resulting point clouds' segmentation and classification into individual entities in various scale steps. Note de contenu : Introduction
I- Geospatial recording and quality control
1- Geospatial recording for heritage
2- Quality control in photogrammetry
3- Integration of Photogrammetry and LaserScanning
II- Point cloud processing algorithms
4- The M_HERACLES tool box
5- From Heritage Complex to Heritage buildings
6- From Heritage buildings to architectural elements
ConclusionsNuméro de notice : 28514 Affiliation des auteurs : non IGN Thématique : IMAGERIE Nature : Thèse française Note de thèse : thèse de Doctorat : Topographie et Géomatique : Université de Strasbourg : 2020 Organisme de stage : Laboratoire ICube (Strasbourg) DOI : sans En ligne : https://tel.archives-ouvertes.fr/tel-02953668/document Format de la ressource électronique : url Permalink : https://documentation.ensg.eu/index.php?lvl=notice_display&id=97253 Systematic errors in SLR data and their impact on the ILRS products / Vincenza Luceri in Journal of geodesy, vol 93 n°11 (November 2019)
![]()
[article]
Titre : Systematic errors in SLR data and their impact on the ILRS products Type de document : Article/Communication Auteurs : Vincenza Luceri, Auteur ; M. Pirri, Auteur ; J. Rodriguez, Auteur ; et al., Auteur Année de publication : 2019 Note générale : bibliographie Langues : Anglais (eng) Descripteur : [Vedettes matières IGN] Géodésie spatiale
[Termes descripteurs IGN] acquisition de données
[Termes descripteurs IGN] contrôle qualité
[Termes descripteurs IGN] données TLS (télémétrie)
[Termes descripteurs IGN] erreur systématique
[Termes descripteurs IGN] interférométrie à très grande base
[Termes descripteurs IGN] International Terrestrial Reference Frame
[Termes descripteurs IGN] qualité des données
[Termes descripteurs IGN] rétroréflecteur
[Termes descripteurs IGN] station TLS (télémétrie)
[Termes descripteurs IGN] télémétrie laser sur satelliteRésumé : (auteur) The satellite laser ranging (SLR) technique has the potential to make extremely precise measurements to retroreflector arrays on orbiting satellites, with normal point range precision at a level of 1 mm for the core tracking stations of the International Laser Ranging Service (ILRS). The main limitation to achieving a similar level of range accuracy is the presence of uncorrected systematic errors, which can be attributed to various sources at the stations (e.g., calibration and/or synchronization procedures, hardware malfunctioning, nonlinearities in the time-of-flight measurement devices), as well as to modeling deficiencies, especially in the ability to refer the range measurements to the center of mass of the spacecraft. The ILRS has always been active in adopting rigorous procedures to detect and remove systematic errors from the data: a group of ILRS analysis centers routinely performs data quality control a few hours after data acquisition; the ILRS Analysis Standing Committee (ASC) is in charge of long-term monitoring and characterization of systematic errors in the observations used for the ILRS products; a Quality Control Board was established in 2015 to address SLR systems’ biases and other data issues. In particular, the ASC is devoting efforts on an investigation of an alternative approach whereby a simultaneous estimation of site coordinates and range biases provides station positions that are in principle free of systematic errors. Results using this approach have shown a significant impact on the realization of the TRF, in particular by reducing the existing scale offset between the VLBI and SLR solutions and reaching a closer agreement with the ITRF2014 scale. This paper outlines the work that continues to be done to improve these products and in particular focuses on new research to evaluate rigorously any impact on the strength of coordinate solutions and geophysical inferences when systematic range errors are determined simultaneously with reference frame parameters. Future procedures for handling systematic errors will be informed by the outcome of the current investigations. Numéro de notice : A2019-612 Affiliation des auteurs : non IGN Thématique : POSITIONNEMENT Nature : Article nature-HAL : ArtAvecCL-RevueIntern DOI : 10.1007/s00190-019-01319-w date de publication en ligne : 19/11/2019 En ligne : https://doi.org/10.1007/s00190-019-01319-w Format de la ressource électronique : url article Permalink : https://documentation.ensg.eu/index.php?lvl=notice_display&id=94800
in Journal of geodesy > vol 93 n°11 (November 2019)[article]Multi-GNSS real-time clock estimation using sequential least square adjustment with online quality control / Wenju Fu in Journal of geodesy, vol 93 n°7 (July 2019)
PermalinkAutomatisation du traitement de données "mobile mapping" : extraction d'éléments linéaires et ponctuels / Loïc Elsholz in XYZ, n° 159 (juin 2019)
PermalinkPermalinkPermalinkAn image-pyramid-based raster-to-vector conversion (IPBRTVC) framework for consecutive-scale cartography and synchronized generalization of classic objects / Chang Li in Photogrammetric Engineering & Remote Sensing, PERS, vol 85 n° 3 (March 2019)
PermalinkApplication de la loi de Benford au contrôle de qualité des modèles numériques de terrain / Laurent Polidori in XYZ, n° 158 (mars 2019)
PermalinkUn bilan des modalités d’évaluation de l’état de conservation des habitats forestiers dans 399 sites Natura 2000 / Damien Marage in Revue forestière française [en ligne], Vol 71 n° 2 (2019)
PermalinkA comparative study between least square and total least square methods for time-series analysis and quality control of sea level observations / Mahmoud Pirooznia in Marine geodesy, vol 42 n° 2 (March 2019)
PermalinkContrôle qualité des cartes de l’Agro Pontino avant bonification / Valerio Baiocchi in Géomatique expert, n° 125 (novembre - décembre 2018)
PermalinkData trustworthiness and user reputation as indicators of VGI quality / Paolo Fogliaroni in Geo-spatial Information Science, vol 21 n° 3 (October 2018)
Permalink