Centre dedocumentation
scientifique

Full-waveform classification and segmentation-based signal detection of single-wavelength bathymetric LiDAR / Xue Ji in IEEE Transactions on geoscience and remote sensing, vol 60 n° 8 (August 2022)  

Public [article]  inIEEE Transactions on geoscience and remote sensing > vol 60 n° 8 (August 2022) . - n° 4208714 Titre : Full-waveform classification and segmentation-based signal detection of single-wavelength bathymetric LiDAR Type de document : Article/Communication Auteurs : Xue Ji, Auteur ; Bisheng Yang, Auteur ; Yuan Wang, Auteur ; et al., Auteur Année de publication : 2022 Article en page(s) : n° 4208714 Note générale : bibliographie Langues : Anglais (eng) Descripteur : [Vedettes matières IGN] Lasergrammétrie [Termes IGN] algorithme de Levenberg-Marquardt [Termes IGN] analyse comparative [Termes IGN] apprentissage automatique [Termes IGN] classification par réseau neuronal convolutif [Termes IGN] détection du signal [Termes IGN] forme d'onde pleine [Termes IGN] Hainan (Chine) [Termes IGN] lidar bathymétrique [Termes IGN] optimisation par essaim de particules Résumé : (auteur) Single-wavelength bathymetric light detection and ranging (LiDAR) (532 nm) can provide seamless meter- and submeter-scale digital elevation model (DEMs) of both the terrestrial surface and seafloor. However, mixed terrestrial and bathymetric surfaces obtained by this sensor are challenging for full-waveform (FW) signal detection. This study addresses the issues in two FW mixed surfaces: accurate classification of terrestrial and nonterrestrial waveforms from the original waveforms without auxiliary information and flexible detection of peaks based on a new FW theoretical model. A novel FW signal detection model (FWSD) for single-wavelength bathymetric LiDAR is proposed without complex feature extraction and iterative procedure through waveform classification and segmentation. The raw FWs are divided into five categories for subsequent signal detection using a convolutional neural network that merges local descriptors with contextual information. The signal detection task is then split into FW segment recognition and peak extraction using a new FW model, which integrates a leapfrog sliding window FW segmentation, an improved extreme learning machine (ELM) algorithm for FW segment recognition, and a flexible signal detection framework. To search for the optimal initial parameters for ELM, a self-annealing particle swarm optimization (SAPSO) algorithm is introduced, and the output weight is adjusted by online sequence to improve its generalization. When combined with the Richardson–Lucy deconvolution (RLD) algorithm, FWSD can be adapted to deal with shallow water waveforms. Finally, a test demonstration with an airborne dataset shows that FWSD has higher detection efficiency and higher accuracy than Levenberg–Marquardt algorithm optimized generalized Gaussian model (LM-GGM) and RLD algorithm. Numéro de notice : A2022-661 Affiliation des auteurs : non IGN Thématique : IMAGERIE Nature : Article nature-HAL : ArtAvecCL-RevueIntern DOI : 10.1109/TGRS.2022.3198168 Date de publication en ligne : 11/08/2022 En ligne : https://doi.org/10.1109/TGRS.2022.3198168 Format de la ressource électronique : URL article Permalink : https://documentation.ensg.eu/index.php?lvl=notice_display&id=101517 [article]

Development of a single-wavelength airborne bathymetric LiDAR: System design and data processing / Kai Guo in ISPRS Journal of photogrammetry and remote sensing, vol 185 (March 2022)  

Public [article]  inISPRS Journal of photogrammetry and remote sensing > vol 185 (March 2022) . - pp 62 - 84 Titre : Development of a single-wavelength airborne bathymetric LiDAR: System design and data processing Type de document : Article/Communication Auteurs : Kai Guo, Auteur ; Qingquan Li, Auteur ; Shisheng Wang, Auteur ; et al., Auteur Année de publication : 2022 Article en page(s) : pp 62 - 84 Note générale : bibliographie Langues : Anglais (eng) Descripteur : [Vedettes matières IGN] Acquisition d'image(s) et de donnée(s) [Termes IGN] forme d'onde pleine [Termes IGN] Hainan (Chine) [Termes IGN] lever bathymétrique [Termes IGN] lidar bathymétrique [Termes IGN] semis de points [Termes IGN] signal lidar [Termes IGN] traitement de données Résumé : (auteur) Airborne laser bathymetry (ALB) is employed to measure shallow depth water by using a high sampling rate and point density. Thus, the problems of using traditional detection methods in inaccessible areas can be avoided. This study focuses on practical solutions for receiving echo signals, identifying target echoes, and integrating land and underwater terrain point cloud data in coastal environments. Optimization of the system design and its data processing scheme is undertaken to improve the performance of the receiving system based on a single-band ALB system developed by the authors at Shenzhen University. A flight experiment over eastern Hainan Island was conducted, during which the effectiveness of the proposed strategy was verified. Finally, the technical characteristics of the self-developed system are summarized to provide a reliable reference source for the subsequent industrialization and production of related marine light detection and ranging (LiDAR) laser systems. Numéro de notice : A2022-134 Affiliation des auteurs : non IGN Thématique : IMAGERIE Nature : Article nature-HAL : ArtAvecCL-RevueIntern DOI : 10.1016/j.isprsjprs.2022.01.011 Date de publication en ligne : 29/01/2022 En ligne : https://doi.org/10.1016/j.isprsjprs.2022.01.011 Format de la ressource électronique : URL article Permalink : https://documentation.ensg.eu/index.php?lvl=notice_display&id=99730 [article]

Réservation

Réserver ce document

Exemplaires (1)

Code-barres	Cote	Support	Localisation	Section	Disponibilité
081-2022031	SL	Revue	Centre de documentation	Revues en salle	Disponible

Footprint size design of large-footprint full-waveform LiDAR for forest and topography applications: A theoretical study / Xuebo Yang in IEEE Transactions on geoscience and remote sensing, vol 59 n° 11 (November 2021)  

Public [article]  inIEEE Transactions on geoscience and remote sensing > vol 59 n° 11 (November 2021) . - pp 9745 - 9757 Titre : Footprint size design of large-footprint full-waveform LiDAR for forest and topography applications: A theoretical study Type de document : Article/Communication Auteurs : Xuebo Yang, Auteur ; Cheng Wang, Auteur ; Xiaohuan Xi, Auteur ; et al., Auteur Année de publication : 2021 Article en page(s) : pp 9745 - 9757 Note générale : bibliographie Langues : Anglais (eng) Descripteur : [Vedettes matières IGN] Lasergrammétrie [Termes IGN] données lidar [Termes IGN] données localisées 3D [Termes IGN] empreinte [Termes IGN] extraction de la végétation [Termes IGN] forme d'onde pleine [Termes IGN] hauteur des arbres [Termes IGN] lidar à retour d'onde complète [Termes IGN] onde lidar [Termes IGN] processus gaussien [Termes IGN] signal lidar Résumé : (auteur) LiDAR footprint, defined as the illumination area of LiDAR sensor on the ground, is the fundamental unit that the sensor collects information from. The design of footprint size crucially influences the acquired LiDAR signals. For large-footprint full-waveform LiDAR, a well-designed footprint size is indispensable to acquire accurate and complete vertical profiles of scene targets. The methods that design the footprint size are increasingly needed to satisfy various application requirements. In this study, an analytical method to designing the footprint size is proposed for forest and topography applications. It is established based on a mixture Gaussian model and the designed footprint size ensures the signals of vegetation and ground can be completely extracted. Experiment results with our method show that the footprint size is preferably in the range of 10.6–25.0 m for forest application, while it is less than 32.3 m for topography application. The intersection of the two sets satisfies both applications. Furthermore, a series of sensibility studies were performed to analyze the influence of multiple key parameters to the optimal footprint size, including the scene characteristics, instrumental configurations, and application requirements. This study provides a theoretical basis for the design of future large-footprint full-waveform laser altimeters. Numéro de notice : A2021-812 Affiliation des auteurs : non IGN Thématique : FORET/IMAGERIE Nature : Article nature-HAL : ArtAvecCL-RevueIntern DOI : 10.1109/TGRS.2021.3054324 Date de publication en ligne : 08/02/2021 En ligne : https://doi.org/10.1109/TGRS.2021.3054324 Format de la ressource électronique : URL article Permalink : https://documentation.ensg.eu/index.php?lvl=notice_display&id=98885 [article]

Geometric calibration of satellite laser altimeters based on waveform matching / Shaoning Li in Photogrammetric record, vol 36 n° 174 (June 2021)  

Public [article]  inPhotogrammetric record > vol 36 n° 174 (June 2021) . - pp 104 - 123 Titre : Geometric calibration of satellite laser altimeters based on waveform matching Type de document : Article/Communication Auteurs : Shaoning Li, Auteur ; Chaokui Li, Auteur ; Guo Zhang, Auteur ; et al., Auteur Année de publication : 2021 Article en page(s) : pp 104 - 123 Note générale : bibliographie Langues : Anglais (eng) Descripteur : [Vedettes matières IGN] Photogrammétrie numérique [Termes IGN] données ICEsat [Termes IGN] étalonnage géométrique [Termes IGN] forme d'onde pleine [Termes IGN] Geoscience Laser Altimeter System [Termes IGN] lidar à retour d'onde complète [Termes IGN] modèle numérique de surface [Termes IGN] point d'appui [Termes IGN] précision altimétrique [Termes IGN] signal laser [Termes IGN] télémétrie laser Résumé : (auteur) This study proposes a new geometric calibration method for satellite laser altimeters based on waveform matching to solve the problems of poor initial pointing accuracy and a lack of control data. This non-real-time method obtains ground control points without a fixed calibration field. First, a large area with stepped surfaces is chosen from the laser altimetry coverage. Then, the laser echo waveforms are simulated using digital surface model (DSM) data of the stepped features. The real echo waveform attempts to match the simulated echo waveforms through a waveform matching model using a global constraint. Next, the control points of the laser altimeter are obtained through waveform matching. Finally, a geometric calibration model for laser altimeters is proposed to compensate for laser pointing and ranging errors. Two experiments were conducted to verify the calibration method using ICESat/GLAS data and airborne large-footprint laser data. Experimental results confirm that the method is feasible and results in an improvement in the elevation accuracy for the airborne altimeter from 2 to 0.5 m. Numéro de notice : A2021-473 Affiliation des auteurs : non IGN Thématique : IMAGERIE Nature : Article DOI : 10.1111/phor.12362 Date de publication en ligne : 07/05/2021 En ligne : https://doi.org/10.1111/phor.12362 Format de la ressource électronique : URL article Permalink : https://documentation.ensg.eu/index.php?lvl=notice_display&id=97926 [article]

Georeferencing with self-calibration for airborne full-waveform Lidar data using digital elevation model / Qinghua Li in Photogrammetric Engineering & Remote Sensing, PERS, vol 87 n° 1 (January 2021)  

Public [article]  inPhotogrammetric Engineering & Remote Sensing, PERS > vol 87 n° 1 (January 2021) . - pp 43 - 52 Titre : Georeferencing with self-calibration for airborne full-waveform Lidar data using digital elevation model Type de document : Article/Communication Auteurs : Qinghua Li, Auteur ; Jie Shan, Auteur Année de publication : 2021 Article en page(s) : pp 43 - 52 Note générale : Bibliographie Langues : Anglais (eng) Descripteur : [Vedettes matières IGN] Lasergrammétrie [Termes IGN] auto-étalonnage [Termes IGN] données lidar [Termes IGN] données localisées 3D [Termes IGN] étalonnage de capteur (imagerie) [Termes IGN] forme d'onde pleine [Termes IGN] géoréférencement [Termes IGN] modèle géométrique de prise de vue [Termes IGN] modèle numérique de surface [Termes IGN] optimisation (mathématiques) [Termes IGN] point d'appui [Termes IGN] synchronisation Résumé : (Auteur) Precise georeferencing of airborne full-waveform lidar is a complex process. On one hand, no ground control points are visible due to heavy canopy. While on the other hand, precise georeferencing relies on ground control. As an alternative, we propose to use an available digital elevation model (DEM ) as control. The mathematical framework minimizes the difference between the lidar DEM and the reference DEM. Our solution consists of two steps: initial optimization to find reliable ground points through iterative filtering and georeferencing, and fine optimization to achieve precise georeferencing and lidar system calibration. Through this approach, the wave-form-derived DEM can best fit the reference DEM, with a mean of 0.937 m and standard deviation of 0.792 m, while the time-synchronization offset and boresight angles are simultaneously determined, i.e., self-calibrated. This development provides a novel georeferencing approach with self-calibration for lidar data without using conventional ground control points. Numéro de notice : A2021-056 Affiliation des auteurs : non IGN Thématique : IMAGERIE Nature : Article nature-HAL : ArtAvecCL-RevueIntern DOI : 10.14358/PERS.87.1.43 Date de publication en ligne : 01/01/2021 En ligne : https://doi.org/10.14358/PERS.87.1.43 Format de la ressource électronique : URL Article Permalink : https://documentation.ensg.eu/index.php?lvl=notice_display&id=96766 [article]

Réservation

Réserver ce document

Exemplaires (1)

Code-barres	Cote	Support	Localisation	Section	Disponibilité
105-2021011	SL	Revue	Centre de documentation	Revues en salle	Disponible

A new waveform decomposition method for multispectral LiDAR / Shalei Song in ISPRS Journal of photogrammetry and remote sensing, vol 149 (March 2019)  

Permalink

Analyzing the role of pulse density and voxelization parameters on full-waveform LiDAR-derived metrics / Pablo Crespo-Peremarch in ISPRS Journal of photogrammetry and remote sensing, vol 146 (December 2018)  

Permalink

DEM refinement by low vegetation removal based on the combination of full waveform data and progressive TIN densification / Hongchao Ma in ISPRS Journal of photogrammetry and remote sensing, vol 146 (December 2018)  

Permalink

A spatio-temporal index for aerial full waveform laser scanning data / Debra F. Laefer in ISPRS Journal of photogrammetry and remote sensing, vol 138 (April 2018)  

Permalink

Decomposition of LiDAR waveforms by B-spline-based modeling / Xiang Shen in ISPRS Journal of photogrammetry and remote sensing, vol 128 (June 2017)  

Permalink

Total canopy transmittance estimated from small-footprint, full-waveform airborne LiDAR / Milutin Milenković in ISPRS Journal of photogrammetry and remote sensing, vol 128 (June 2017)  

Permalink

CHP toolkit : case study of LAIe sensitivity to discontinuity of canopy cover in fruit plantations / Karolina D. Fieber in IEEE Transactions on geoscience and remote sensing, vol 54 n° 9 (September 2016)  

Permalink

Local-scale flood mapping on vegetated floodplains from radiometrically calibrated airborne LiDAR data / Radosław Malinowski in ISPRS Journal of photogrammetry and remote sensing, vol 119 (September 2016)  

Permalink

Fusion of waveform LiDAR data and hyperspectral imagery for land cover classification / Hongzhou Wang in ISPRS Journal of photogrammetry and remote sensing, vol 108 (October 2015)  

Permalink

Full-waveform data for building roof step edge localization / Małgorzata Słota in ISPRS Journal of photogrammetry and remote sensing, vol 106 (August 2015)  

Permalink